H3C-IPX-MIB

All MIBs › H3C-IPX-MIB

Organization: Huawei 3Com Technologies Co.,Ltd.

Last Updated: 2004-12-24

Category: SNA and Legacy Protocols, Vendor: H3C/HH3C

Description: H3C MIB for IPX (Internetwork Packet Exchange) protocol management including routing and SAP service tables.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-IPX-MIB?

H3C-IPX-MIB is an H3C private-enterprise MIB for managing the legacy Novell IPX (Internetwork Packet Exchange) protocol on routers and switches, organized by its own description into four functional areas: interface configuration, RIP routing, SAP service advertisement, and IPX statistics. It exposes per-interface IPX configuration such as network ID, node ID, encapsulation type, split-horizon setting, and RIP timer/MTU parameters, along with RIP route and SAP service information. Its monitoring emphasis is protocol/software configuration status rather than hardware sensors: an operator verifies each IPX-enabled interface's configuration, confirms RIP routes are being learned, and checks that SAP service advertisements are populated correctly. It implements the largely obsolete Novell IPX/RIP/SAP protocol suite as a standalone H3C private extension with no dependency on modern IP-centric standard MIBs. Deployment context is legacy H3C routers/switches still supporting Novell NetWare IPX environments, now rare and mostly confined to older enterprise networks that have not fully migrated off IPX. Engineers can download the H3C-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C router/switch (legacy Novell IPX support)

Monitoring Examples

An administrator polls h3cIpxIfConfigTable/h3cIpxIfConfigEntry, indexed by h3cIpxIfIndex, to check h3cIpxIfNetId, h3cIpxIfNodeId, and h3cIpxIfEncapsuleType, confirming each IPX-enabled interface is configured consistently with its neighbors. h3cIpxStatus indicates whether IPX routing is globally enabled on the device, while the h3cIpxRip and h3cIpxSap groups would be checked to confirm routes and service advertisements are being learned correctly, revealing a misconfigured or disconnected IPX segment if entries are missing.

What Can Be Monitored

IPX global enable status
per-interface network ID and node ID
encapsulation type
RIP route status
SAP service advertisements

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using h3cIpxStatTotalReceives OID:

Select an H3C router/switch (legacy Novell IPX support) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cIpxStatTotalReceives into the Find box to locate it in the OID tree, then select it and click OK. The total number of packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cIpx	1.3.6.1.4.1.2011.10.2.34			This mib defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information and statistic information on each interface. 2.rip group - Rip means route information protocol. This group contains configurable management information and route status and route statistic information. 3.sap group - Sap means service access group. This group contains all service information. 4.ipx statistics group - This group includes ipx statistic information on all interfaces.
h3cIpxConfig	1.3.6.1.4.1.2011.10.2.34.1
ENA h3cIpxStatus	1.3.6.1.4.1.2011.10.2.34.1.1	EnabledStatus	read-write	This object is used to enable or disable ipx globally.
h3cIpxIfConfigTable	1.3.6.1.4.1.2011.10.2.34.1.2		not-accessible	Table of configurable management information on each interface.
h3cIpxIfConfigEntry	1.3.6.1.4.1.2011.10.2.34.1.2.1		not-accessible	An entry in the table, containing management information about a single interface.
I32 h3cIpxIfIndex	1.3.6.1.4.1.2011.10.2.34.1.2.1.1	Integer32	not-accessible	This variable uniquely identifies the interface to which the configurations are applied.
OCT h3cIpxIfNetId	1.3.6.1.4.1.2011.10.2.34.1.2.1.2	OCTET STRING	read-create	The network number of the IPX address of this interface.
OCT h3cIpxIfNodeId	1.3.6.1.4.1.2011.10.2.34.1.2.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
ENA h3cIpxIfSplitHorizon	1.3.6.1.4.1.2011.10.2.34.1.2.1.4	EnabledStatus	read-create	This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
I32 h3cIPxIfTick	1.3.6.1.4.1.2011.10.2.34.1.2.1.5	Integer32	read-create	This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks.
ENA h3cIpxIfUpdateChangeOnly	1.3.6.1.4.1.2011.10.2.34.1.2.1.6	EnabledStatus	read-create	When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
I32 h3cIpxIfRipMtu	1.3.6.1.4.1.2011.10.2.34.1.2.1.7	Integer32	read-create	This variable is used to define the max length of RIP updating packets.
INT h3cIpxIfEncapsuleType	1.3.6.1.4.1.2011.10.2.34.1.2.1.8	INTEGER	read-create	This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port.
ENA h3cIpxIfNetbiosPropagation	1.3.6.1.4.1.2011.10.2.34.1.2.1.9	EnabledStatus	read-create	This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used for NetBIOS.
ENA h3cIpxIfSapStatus	1.3.6.1.4.1.2011.10.2.34.1.2.1.10	EnabledStatus	read-create	The status of sap on the current interface. It is enabled when ipx is enabled on this interface.
I32 h3cIpxIfSapMtu	1.3.6.1.4.1.2011.10.2.34.1.2.1.11	Integer32	read-create	This variable is used to define the max length of SAP refreshing packets.
ENA h3cIpxIfGnsReply	1.3.6.1.4.1.2011.10.2.34.1.2.1.12	EnabledStatus	read-create	This object is used to enable or disable the current interface to response the IPX GNS request.
ROW h3cIpxIfRowStatus	1.3.6.1.4.1.2011.10.2.34.1.2.1.13	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
h3cIpxRip	1.3.6.1.4.1.2011.10.2.34.2
I32 h3cIpxRouteMultiplier	1.3.6.1.4.1.2011.10.2.34.2.1	Integer32	read-write	This node is used to calculate Rip aging time of route information. The absolute aging time = (h3cIpxRouteMultiplier * h3cIpxRouteUpdateTimer).
I32 h3cIpxRouteUpdateTimer	1.3.6.1.4.1.2011.10.2.34.2.2	Integer32	read-write	This node is used to set rip updating time which is based on seconds
ENA h3cIpxRouteImpRouteStatic	1.3.6.1.4.1.2011.10.2.34.2.3	EnabledStatus	read-write	This object determines whether static route can be imported.
I32 h3cIpxRouteLoadBalancePaths	1.3.6.1.4.1.2011.10.2.34.2.4	Integer32	read-write	This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive.
I32 h3cIpxRouteMaxResPaths	1.3.6.1.4.1.2011.10.2.34.2.5	Integer32	read-write	This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually.
h3cIpxRouteTable	1.3.6.1.4.1.2011.10.2.34.2.6		not-accessible	This table contains all dynamic and direct ipx route information of this system. The information of this table is read only.
h3cIpxRouteEntry	1.3.6.1.4.1.2011.10.2.34.2.6.1		not-accessible	Each entry includes a dynamic or direct route.
I32 h3cIpxRouteIndex	1.3.6.1.4.1.2011.10.2.34.2.6.1.1	Integer32	not-accessible	This object uniquely identifies a route.
OCT h3cIpxRouteDestNetId	1.3.6.1.4.1.2011.10.2.34.2.6.1.2	OCTET STRING	read-only	The destination network number of this route information, and its value ranges from 1 to 0xfffffffe.
OCT h3cIpxRouteNextHop	1.3.6.1.4.1.2011.10.2.34.2.6.1.3	OCTET STRING	read-only	The next hop of this route.
INT h3cIpxRoutePro	1.3.6.1.4.1.2011.10.2.34.2.6.1.4	INTEGER	read-only	The protocol type of this route information.
I32 h3cIpxRoutePre	1.3.6.1.4.1.2011.10.2.34.2.6.1.5	Integer32	read-only	The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100.
I32 h3cIpxRouteTicks	1.3.6.1.4.1.2011.10.2.34.2.6.1.6	Integer32	read-only	The time, in ticks, that the packet takes to reach the destination.
I32 h3cIpxRouteHops	1.3.6.1.4.1.2011.10.2.34.2.6.1.7	Integer32	read-only	The object indicates the number of hops that the packet must be passed through to reach the destination.
I32 h3cIpxRouteTime	1.3.6.1.4.1.2011.10.2.34.2.6.1.8	Integer32	read-only	The aging time of this route information. The aging time of static and interface route information is 0.
OCT h3cIpxRouteOutInterface	1.3.6.1.4.1.2011.10.2.34.2.6.1.9	OCTET STRING	read-only	The out interface of this route information.
h3cIpxStaticRouteTable	1.3.6.1.4.1.2011.10.2.34.2.7		not-accessible	This table contains all static ipx route information of this system.
h3cIpxStaticRouteEntry	1.3.6.1.4.1.2011.10.2.34.2.7.1		not-accessible	Each entry includes one static route information.
OCT h3cIpxStaticRouteDestNetId	1.3.6.1.4.1.2011.10.2.34.2.7.1.1	OCTET STRING	not-accessible	The index of Static Route Table. This object and h3cIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route.
OCT h3cIpxStaticRouteNextHop	1.3.6.1.4.1.2011.10.2.34.2.7.1.2	OCTET STRING	not-accessible	The sub-index of Static Route Table. The next hop of this static route information.
I32 h3cIpxStaticRoutePre	1.3.6.1.4.1.2011.10.2.34.2.7.1.3	Integer32	read-create	The preference of this route information. Static route's preference is 60, and it can be configured.
OCT h3cIpxStaticRouteOutIf	1.3.6.1.4.1.2011.10.2.34.2.7.1.4	OCTET STRING	read-create	The out interface of this route. This interface can be serial or pos interface.
I32 h3cIpxStaticRouteTicks	1.3.6.1.4.1.2011.10.2.34.2.7.1.5	Integer32	read-create	The time, in ticks that the packet takes to reach the destination with the static route.
I32 h3cIpxStaticRouteHops	1.3.6.1.4.1.2011.10.2.34.2.7.1.6	Integer32	read-create	This object indicates how many hops are needed to arrive at the destination network.
INT h3cIpxStaticRouteStatus	1.3.6.1.4.1.2011.10.2.34.2.7.1.7	INTEGER	read-create	The status of this static route.
ROW h3cIpxStaticRouteRowStatus	1.3.6.1.4.1.2011.10.2.34.2.7.1.8	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
h3cIpxRouteStatTable	1.3.6.1.4.1.2011.10.2.34.2.8		not-accessible	A table includes all statistic route information.
h3cIpxRouteStatEntry	1.3.6.1.4.1.2011.10.2.34.2.8.1		not-accessible	An entry records a statistic information of route.
INT h3cIpxRouteStatPro	1.3.6.1.4.1.2011.10.2.34.2.8.1.1	INTEGER	not-accessible	The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes.
C32 h3cIpxRouteStatRoutes	1.3.6.1.4.1.2011.10.2.34.2.8.1.2	Counter32	read-only	The route amount of the corresponding protocol type.
C32 h3cIpxRouteStatActives	1.3.6.1.4.1.2011.10.2.34.2.8.1.3	Counter32	read-only	The active route amount of the corresponding protocol type.
C32 h3cIpxRouteStatAddeds	1.3.6.1.4.1.2011.10.2.34.2.8.1.4	Counter32	read-only	The added route amount of the corresponding protocol type.
C32 h3cIpxRouteStatDeleteds	1.3.6.1.4.1.2011.10.2.34.2.8.1.5	Counter32	read-only	The deleted but not freed route amount of the corresponding protocol type.
C32 h3cIpxRouteStatFreeds	1.3.6.1.4.1.2011.10.2.34.2.8.1.6	Counter32	read-only	The freed route amount of the corresponding protocol type.
h3cIpxSap	1.3.6.1.4.1.2011.10.2.34.3
I32 h3cIpxSapMultiplier	1.3.6.1.4.1.2011.10.2.34.3.1	Integer32	read-write	This node is used to calculate aging time of service information. The absolute aging time = (h3cIpxSapMultiplier * h3cIpxSapUpdateTimer).
I32 h3cIpxSapUpdateTimer	1.3.6.1.4.1.2011.10.2.34.3.2	Integer32	read-write	This node is used to set service packet updating time which is based on seconds.
ENA h3cIpxSapGnsLoadBalance	1.3.6.1.4.1.2011.10.2.34.3.3	EnabledStatus	read-write	This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's service information table).
I32 h3cIpxSapMaxResServers	1.3.6.1.4.1.2011.10.2.34.3.4	Integer32	read-write	This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches to the maximum number, no new information can be added.
h3cIpxServiceTable	1.3.6.1.4.1.2011.10.2.34.3.5		not-accessible	This table inlcudes all dynamic service information. The dynamic service information can be read only.
h3cIpxServiceEntry	1.3.6.1.4.1.2011.10.2.34.3.5.1		not-accessible	One entry records one service
I32 h3cIpxServiceIndex	1.3.6.1.4.1.2011.10.2.34.3.5.1.1	Integer32	not-accessible	This object uniquely identifies a service information.
OCT h3cIpxServiceName	1.3.6.1.4.1.2011.10.2.34.3.5.1.2	OCTET STRING	read-only	The name of the service.
OCT h3cIpxServiceType	1.3.6.1.4.1.2011.10.2.34.3.5.1.3	OCTET STRING	read-only	The service type.
OCT h3cIpxServiceNetId	1.3.6.1.4.1.2011.10.2.34.3.5.1.4	OCTET STRING	read-only	The IPX network number portion of the IPX address of the service.
OCT h3cIpxServiceNodeId	1.3.6.1.4.1.2011.10.2.34.3.5.1.5	OCTET STRING	read-only	The IPX node number portion of the IPX address of the service.
OCT h3cIpxServiceSocketNo	1.3.6.1.4.1.2011.10.2.34.3.5.1.6	OCTET STRING	read-only	The socket portion of the IPX address of the service
I32 h3cIpxServicePreference	1.3.6.1.4.1.2011.10.2.34.3.5.1.7	Integer32	read-only	The service preference of the service
I32 h3cIpxServiceHops	1.3.6.1.4.1.2011.10.2.34.3.5.1.8	Integer32	read-only	The hops from the device to the server.
OCT h3cIpxServiceRecvIf	1.3.6.1.4.1.2011.10.2.34.3.5.1.9	OCTET STRING	read-only	Interface from which the service is receieved
h3cIpxStaticServiceTable	1.3.6.1.4.1.2011.10.2.34.3.6		not-accessible	This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification
h3cIpxStaticServiceEntry	1.3.6.1.4.1.2011.10.2.34.3.6.1		not-accessible	An entry records one service
OCT h3cIpxStaticServiceType	1.3.6.1.4.1.2011.10.2.34.3.6.1.1	OCTET STRING	not-accessible	The index of static service table.
OCT h3cIpxStaticServiceName	1.3.6.1.4.1.2011.10.2.34.3.6.1.2	OCTET STRING	not-accessible	The sub-index of static service table. The name of the service.
OCT h3cIpxStaticServiceNetId	1.3.6.1.4.1.2011.10.2.34.3.6.1.3	OCTET STRING	not-accessible	The sub-index of static service table. The IPX network number portion of the IPX address of the service.
OCT h3cIpxStaticServiceNodeId	1.3.6.1.4.1.2011.10.2.34.3.6.1.4	OCTET STRING	read-create	The IPX node number portion of the IPX address of the service.
OCT h3cIpxStatciServiceSocketNo	1.3.6.1.4.1.2011.10.2.34.3.6.1.5	OCTET STRING	read-create	The socket portion of the IPX address of the service.
I32 h3cIpxStaticServicePreference	1.3.6.1.4.1.2011.10.2.34.3.6.1.6	Integer32	read-create	The service preference of the server.
I32 h3cIpxStaticServiceHops	1.3.6.1.4.1.2011.10.2.34.3.6.1.7	Integer32	read-create	The hops from the device to the server.
INT h3cIpxStaticServiceStatus	1.3.6.1.4.1.2011.10.2.34.3.6.1.8	INTEGER	read-create	The status of the service that you created. The value of this object is determined by system.
ROW h3cIpxStaticServiceRowStatus	1.3.6.1.4.1.2011.10.2.34.3.6.1.9	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
h3cIpxStat	1.3.6.1.4.1.2011.10.2.34.4
h3cIpxStatGlobal	1.3.6.1.4.1.2011.10.2.34.4.1
C32 h3cIpxStatTotalReceivesEx	1.3.6.1.4.1.2011.10.2.34.4.1.1	Counter32	read-only	The total number of packets received.
C32 h3cIpxStatPitchs	1.3.6.1.4.1.2011.10.2.34.4.1.2	Counter32	read-only	The number of received packets filled by device when forwarding or delivering up to upper protocol.
C32 h3cIpxStatLenErrors	1.3.6.1.4.1.2011.10.2.34.4.1.3	Counter32	read-only	The number of received packets discarded due to length error.
C32 h3cIpxStatFormatErrors	1.3.6.1.4.1.2011.10.2.34.4.1.4	Counter32	read-only	The number of received packets discarded due to format error.
C32 h3cIpxStatBadHops	1.3.6.1.4.1.2011.10.2.34.4.1.5	Counter32	read-only	The number of received packets which's value of field Hops is greater than 16.
C32 h3cIpxStatHopsDiscards	1.3.6.1.4.1.2011.10.2.34.4.1.6	Counter32	read-only	The number of received packets of which hops portion is equal to 16.
C32 h3cIpxStatOtherErrors	1.3.6.1.4.1.2011.10.2.34.4.1.7	Counter32	read-only	The number of received packets discarded due to other error.
C32 h3cIpxStatLocalDests	1.3.6.1.4.1.2011.10.2.34.4.1.8	Counter32	read-only	The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides.
C32 h3cIpxStatCantDeals	1.3.6.1.4.1.2011.10.2.34.4.1.9	Counter32	read-only	The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol.
C32 h3cIpxStatForwards	1.3.6.1.4.1.2011.10.2.34.4.1.10	Counter32	read-only	The number of received packets to be forwarded in the case that the entity was not their final destination.
C32 h3cIpxStatGenerates	1.3.6.1.4.1.2011.10.2.34.4.1.11	Counter32	read-only	The number of sent packets that the device generated itself.
C32 h3cIpxStatNoRoutes	1.3.6.1.4.1.2011.10.2.34.4.1.12	Counter32	read-only	The number of packets discarded due to no route to the destination was found in routing table.
C32 h3cIpxStatOutDiscards	1.3.6.1.4.1.2011.10.2.34.4.1.13	Counter32	read-only	The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route.
C32 h3cIpxStatRipSends	1.3.6.1.4.1.2011.10.2.34.4.1.14	Counter32	read-only	The total number of RIP packets sent.
C32 h3cIpxStatRipReceives	1.3.6.1.4.1.2011.10.2.34.4.1.15	Counter32	read-only	The total number of RIP packets received.
C32 h3cIpxStaRipRspSends	1.3.6.1.4.1.2011.10.2.34.4.1.16	Counter32	read-only	The total number of RIP response packets sent.
C32 h3cIpxStaRipRspReceives	1.3.6.1.4.1.2011.10.2.34.4.1.17	Counter32	read-only	The total number of RIP response packets received.
C32 h3cIpxStatRipReqReceives	1.3.6.1.4.1.2011.10.2.34.4.1.18	Counter32	read-only	The total number of RIP request packets received.
C32 h3cIpxStatRipReqDeals	1.3.6.1.4.1.2011.10.2.34.4.1.19	Counter32	read-only	The total number of RIP request packets dealt with.
C32 h3cIpxStatRipReqSends	1.3.6.1.4.1.2011.10.2.34.4.1.20	Counter32	read-only	The total number of RIP request packets sent.
C32 h3cIpxStatRipPeriUpdates	1.3.6.1.4.1.2011.10.2.34.4.1.21	Counter32	read-only	The total number of periodic update RIP packets sent.
C32 h3cIpxStatSapGenReqReceives	1.3.6.1.4.1.2011.10.2.34.4.1.22	Counter32	read-only	The total number of SAP general request packets received.
C32 h3cIpxStatSapSpecReqReceives	1.3.6.1.4.1.2011.10.2.34.4.1.23	Counter32	read-only	The total number of SAP specific request packets received.
C32 h3cIpxStatSapGnsReqReceives	1.3.6.1.4.1.2011.10.2.34.4.1.24	Counter32	read-only	The total number of SAP GNS request packets received.
C32 h3cIpxStatSapGenRspSends	1.3.6.1.4.1.2011.10.2.34.4.1.25	Counter32	read-only	The total number of SAP general response packets sent.
C32 h3cIpxStatSapSpecRspSends	1.3.6.1.4.1.2011.10.2.34.4.1.26	Counter32	read-only	The total number of SAP specific response packets sent.
C32 h3cIpxStatSapGnsRspSends	1.3.6.1.4.1.2011.10.2.34.4.1.27	Counter32	read-only	The total number of SAP GNS response packets sent.
C32 h3cIpxStatSapPeriUpdates	1.3.6.1.4.1.2011.10.2.34.4.1.28	Counter32	read-only	The total number of SAP periodic update packets sent.
C32 h3cIpxStatSapInPktErrors	1.3.6.1.4.1.2011.10.2.34.4.1.29	Counter32	read-only	The total number of SAP error packets received.
h3cIpxStatInterface	1.3.6.1.4.1.2011.10.2.34.4.2
h3cIpxIfStatTable	1.3.6.1.4.1.2011.10.2.34.4.2.1		not-accessible	The table of the statistic information on each interface.
h3cIpxIfStatEntry	1.3.6.1.4.1.2011.10.2.34.4.2.1.1		not-accessible	The entry of the statistic table.
I32 h3cIpxIfStatIndex	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.1	Integer32	not-accessible	The index of the table's entry. According to the interface's index.
OCT h3cIpxIfStatNetId	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.2	OCTET STRING	read-only	The network number of the IPX address of this interface.
OCT h3cIpxIfStatNodeId	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
C32 h3cIpxIfStatIpxReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.4	Counter32	read-only	The total number of packets received on the interface.
C32 h3cIpxIfStatIpxSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.5	Counter32	read-only	The total number of packets sent on the interface.
C32 h3cIpxIfStatIpxRecvBytes	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.6	Counter32	read-only	The total number of bytes received on the interface.
C32 h3cIpxIfStatIpxSendBytes	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.7	Counter32	read-only	The total number of bytes sent on the interface.
C32 h3cIpxIfStatRipReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.8	Counter32	read-only	The total number of RIP packets received on the interface.
C32 h3cIpxIfStatRipSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.9	Counter32	read-only	The total number of RIP packets sent on the interface.
C32 h3cIpxIfStatRipDiscards	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.10	Counter32	read-only	The total number of RIP packets discarded on the interface.
C32 h3cIpxIfStatRipSpecReqReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.11	Counter32	read-only	The total number of RIP specific request packets received on the interface.
C32 h3cIpxIfStatRipSpecRspSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.12	Counter32	read-only	The total number of RIP specific response packets sent on the interface.
C32 h3cIpxIfStatRipGenReqReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.13	Counter32	read-only	The total number of RIP general request packets received on the interface.
C32 h3cIpxIfStatRipGenRspSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.14	Counter32	read-only	The total number of RIP general response packets sent on the interface.
C32 h3cIpxIfStatSapReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.15	Counter32	read-only	The total number of SAP packets received on the interface.
C32 h3cIpxIfStatSapSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.16	Counter32	read-only	The total number of SAP packets sent on the interface.
C32 h3cIpxIfStatSapDiscards	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.17	Counter32	read-only	The total number of SAP packets discarded on the interface.
C32 h3cIpxIfStatSapGnsReqReceives	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.18	Counter32	read-only	The total number of SAP GNS response packets received on the interface.
C32 h3cIpxIfStatSapGnsRspSends	1.3.6.1.4.1.2011.10.2.34.4.2.1.1.19	Counter32	read-only	The total number of SAP GNS response packets sent on the interface.

RFC description

IPX protocol management including interface configuration, RIP routing, SAP services, and statistics.

Start monitoring H3C router/switch (legacy Novell IPX support) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-IPX-MIB