A3COM-HUAWEI-FLOWTEMPLATE-MIB

All MIBs › A3COM-HUAWEI-FLOWTEMPLATE-MIB

Organization: Huawei 3Com Technologies Co., Ltd.

Last Updated: 2005-11-24

Category: Network Monitoring (RMON), Vendor: H3C/HH3C

Description: Manages NetFlow/IPFIX flow template definitions and export collector configuration on H3C devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-FLOWTEMPLATE-MIB?

A3COM-HUAWEI-FLOWTEMPLATE-MIB manages NetFlow/IPFIX-style flow template definitions and export-collector configuration on H3C devices, per its terse module_desc describing it as a "flow template management information base." It is expected to expose configured flow record templates, template refresh intervals, and destination collector addresses/ports for exported flow records. This is primarily a configuration MIB for the flow-export software feature rather than hardware, useful for confirming the flow-monitoring subsystem itself is correctly configured and, indirectly, that flow export traffic is reaching the intended collector. Dependency: it is conceptually related to IETF IPFIX/NetFlow template mechanisms though implemented as an H3C proprietary MIB rather than the standard IPFIX-MIB. Deployment is on H3C routers/switches performing traffic-flow export to a NetFlow/IPFIX collector for traffic analytics. Engineers can download the A3COM-HUAWEI-FLOWTEMPLATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-FLOWTEMPLATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers and switches

Monitoring Examples

No specific tables or objects were present in the sampled source for this module, so a concrete OID-level example is not given here to avoid inventing identifiers. In practice such a MIB would typically be polled for the configured collector IP/port and template ID list, and an admin would check these against the collector's received-template log if flow records stopped arriving.

What Can Be Monitored

configured flow template identifiers
export collector address/port configuration

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cFlowTemplate	1.3.6.1.4.1.43.45.1.10.2.64			Huawei-3com flow template management information base.
h3cFlowTemplateMibObject	1.3.6.1.4.1.43.45.1.10.2.64.1
h3cFTConfigGroup	1.3.6.1.4.1.43.45.1.10.2.64.1.1
I32 h3cFTGroupNextIndex	1.3.6.1.4.1.43.45.1.10.2.64.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for h3cFTGroupIndex when creating rows in the h3cFTGroupTable. If it is 2147483647, it denotes that h3cFTGroupTable can't create any instance.
h3cFTGroupTable	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2		not-accessible	A table of flow template group. A flow template group, which is applied to interface, must use h3cFTGroupTable to create a instance and h3cFTBasicGroupTable or h3cFTExtendGroupTable to configure flow template's need item. A basic flow template must use h3cFTBasicGroupTable to configure some basic flow template's need item, such as: address, protocol, priority. A extend flow template must use h3cFTExtendGroupTable to configure packet's type and offset and length.
h3cFTGroupEntry	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2.1		not-accessible	Flow template group information.
I32 h3cFTGroupIndex	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2.1.1	Integer32	not-accessible	Flow template group index.
OCT h3cFTGroupName	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2.1.2	OCTET STRING	read-create	Flow template group name.
INT h3cFTGroupType	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2.1.3	INTEGER	read-create	Type of flow template.
ROW h3cFTGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.64.1.1.2.1.4	RowStatus	read-create	RowStatus.
h3cFTBasicGroupTable	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3		not-accessible	A table of basic flow template group.
h3cFTBasicGroupEntry	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1		not-accessible	Basic flow template group information.
BIT h3cFTBasicGroupAddressType	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.1	Bits	read-create	Type of MAC and IP address. This is a bit-map of possible conditions. The various bit positions are: sourceIpv4Address source IPv4's address destIPv4Address destination IPv4's address sourceIPv6Address source IPv6 address destIPv6Address destination IPv6 address sourceMacAddress source MAC address destMacAddress destination MAC address
BIT h3cFTBasicGroupPriorityType	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.2	Bits	read-create	Type of priority. This is a bit-map of possible conditions. The various bit positions are: vlanID VlanID cos 802.1p priority topVlanID VlanID of top layer topCos 802.1p priority of top layer fragment fragment tcpFlag TCP flag tos type of service dscp DSCP ipprecedence IP precedence
BIT h3cFTBasicGroupProtocolType	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.3	Bits	read-create	Type of protocol. This is a bit-map of possible conditions. The various bit positions are: l2Potocol layer 2 protocol ipv4L3Protocol layer 3 protocol of IPv4 ipv6L3Protocol layer 3 protocol of IPv6 icmpProtocolType Type of ICMP protocol of IPv4 icmpProtocolCode Code of ICMP protocol of IPv4 icmpv6ProtocolType Type of ICMP protocol of IPv6 icmpv6ProtocolCode Code of ICMP protocol of IPv6 sourceL4Port port of layer 4 of source destL4Port port of layer 4 of destination
MAC h3cFTBasicGroupSMacWildCard	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.4	MacAddress	read-create	Source MAC address field in Ethernet packet head.
MAC h3cFTBasicGroupDMacWildCard	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.5	MacAddress	read-create	Destination MAC address field in Ethernet packet head.
ROW h3cFTBasicGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.64.1.1.3.1.6	RowStatus	read-create	RowStatus.
h3cFTExtendGroupTable	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4		not-accessible	A table of extend flow template group information.
h3cFTExtendGroupEntry	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4.1		not-accessible	Extend flow template group information entry.
INT h3cFTExtendGroupOffsetType	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4.1.1	INTEGER	not-accessible	Offset type of the packet. start Offset from the start of the packet mpls Offset from the head of MPLS l2 Offset from the head of the L2 frame l4 Offset from the head of L4 packet l5 Offset from the head of the L5 packet ipv4 Offset from the head of the IPv4 packet ipv6 Offset from the head of the IPv6 packet
I32 h3cFTExtendGroupOffsetMaxValue	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4.1.2	Integer32	read-create	The max value of offset.
I32 h3cFTExtendGroupLengthMaxValue	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4.1.3	Integer32	read-create	The max value of length.
ROW h3cFTExtendGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.64.1.1.4.1.4	RowStatus	read-create	RowStatus.
h3cFTApplyGroup	1.3.6.1.4.1.43.45.1.10.2.64.1.2
h3cFTIfApplyTable	1.3.6.1.4.1.43.45.1.10.2.64.1.2.1		not-accessible	A table of any interface with flowtemplate. A flow template, which will be applied interface, is an instance at h3cFTGroupTable and h3cFTBasicGroupTable or h3cFTExtendGroupTable. A basic flow template is an instance at h3cFTGroupTable and h3cFTBasicGroupTable, and the instance's RowStatus must be 'active' at each table. A extend flow template is an instance at h3cFTGroupTable and h3cFTExtendGroupTable, and the instance's RowStatus must be 'active' at each table.
h3cFTIfApplyEntry	1.3.6.1.4.1.43.45.1.10.2.64.1.2.1.1		not-accessible	Any interface with flowtemplate information.
OCT h3cFTIfApplyGroupName	1.3.6.1.4.1.43.45.1.10.2.64.1.2.1.1.1	OCTET STRING	read-only	The name of flow template.
ROW h3cFTIfApplyRowStatus	1.3.6.1.4.1.43.45.1.10.2.64.1.2.1.1.2	RowStatus	read-create	RowStatus.

RFC description

Manages flow templates on Huawei 3Com switches for packet classification and QoS policy application.

Start monitoring H3C routers and switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-FLOWTEMPLATE-MIB

What Is A3COM-HUAWEI-FLOWTEMPLATE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description