ZhoneVdsl-MIB :: zhoneVdslLineConfDownGinpReinFreq

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ZhoneVdsl-MIB › zhoneVdslLineConfDownGinpReinFreq

zhoneVdslLineConfDownGinpReinFreq

Module: ZhoneVdsl-MIB

OID (symbolic): ZhoneVdsl-MIB::zhoneVdslLineConfDownGinpReinFreq

OID (numeric): 1.3.6.1.4.1.5504.5.13.1.1.11.1.152

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used in the Channel Initialization Policy and on-line reconfiguration procedures. REIN is commonly coupled from electrical power cables appliances drawing power from the AC electrical power network, having a repetition rate of twice the AC power frequency (100 or 120 Hz). The valid values are integers 100 hz or 120 hz. ITU-T G.998.4 7.1.1 Control parameters and 7.1.2 Valid configurations.

What is zhoneVdslLineConfDownGinpReinFreq?

Frequency of downstream REIN inter-arrival time for G.INP: freq100hz(1) or freq120hz(2, default). REIN usually couples in from mains-powered appliances at twice the AC frequency, so pick 100 Hz for 50 Hz mains and 120 Hz for 60 Hz mains. It is read-write rather than read-create.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.13.1.1.11.1.152
snmpwalk -v2c -c public <target> ZhoneVdsl-MIB::zhoneVdslLineConfDownGinpReinFreq

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.13.1.1.11.1.152.1
snmpget -v2c -c public <target> ZhoneVdsl-MIB::zhoneVdslLineConfDownGinpReinFreq.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.13.1.1.11.1.152.1 i <value>

Start monitoring Zhone Technologies DSLAM, VDSL CPE modem/router (line-rate/sync-training/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZhoneVdsl-MIB::zhoneVdslLineConfDownGinpReinFreq OID value, configure state conditions and alerts, and monitor any Zhone Technologies DSLAM, VDSL CPE modem/router (line-rate/sync-training/error-counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.5zhonePhysicalZhone
1.3.6.1.4.1.5504.5.13zhoneVdslZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.5.13.1zhoneVdslLineMibZhoneVdsl-MIB
1.3.6.1.4.1.5504.5.13.1.1zhoneVdslMibObjectsZhoneVdsl-MIB
1.3.6.1.4.1.5504.5.13.1.1.11zhoneVdslLineConfProfileTableZhoneVdsl-MIB
1.3.6.1.4.1.5504.5.13.1.1.11.1zhoneVdslLineConfProfileEntryZhoneVdsl-MIB
1.3.6.1.4.1.5504.5.13.1.1.11.1.152zhoneVdslLineConfDownGinpReinFreqZhoneVdsl-MIB