ZhoneAAL2-MIB :: aal2VclFrameModeData

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZhoneAAL2-MIB › aal2VclFrameModeData

aal2VclFrameModeData

Module: ZhoneAAL2-MIB

OID (symbolic): ZhoneAAL2-MIB::aal2VclFrameModeData

OID (numeric): 1.3.6.1.4.1.5504.4.2.1.1.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Frame mode data is an intermittent data stream containing delimited units of information, possibly of varying size, with idle intervals between them.

The service provided is the transport of data units as specified in the Transmission Error Detection service of Recommendation I.366.1. There is no assurance of data unit delivery, but if delivered, the relative sequence and the bit integrity of data units are assured. This service corresponds to the service provided by the Common Part of AAL type 5, Recommendation I.363.5, except that the option of corrupted data delivery is not available.

Valid values are enabled and disabled.

What is aal2VclFrameModeData?

Sets the default mode for frame-mode data transfer, an intermittent stream of delimited data units delivered like AAL5's common part but without the option of corrupted-data delivery, on channels of this VCL.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.4.2.1.1.1.14
snmpwalk -v2c -c public <target> ZhoneAAL2-MIB::aal2VclFrameModeData

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.4.2.1.1.1.14.1
snmpget -v2c -c public <target> ZhoneAAL2-MIB::aal2VclFrameModeData.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.4.2.1.1.1.14.1 i <value>

Start monitoring Zhone ATM access/aggregation platform (AAL2 voice-over-ATM circuit performance-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZhoneAAL2-MIB::aal2VclFrameModeData OID value, configure state conditions and alerts, and monitor any Zhone ATM access/aggregation platform (AAL2 voice-over-ATM circuit performance-counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.4zhoneCommunicationProtocolsZhone
1.3.6.1.4.1.5504.4.2zhoneAtmZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.4.2.1zhoneAtmAAl2ZhoneAAL2-MIB
1.3.6.1.4.1.5504.4.2.1.1aal2VclTableZhoneAAL2-MIB
1.3.6.1.4.1.5504.4.2.1.1.1aal2VclEntryZhoneAAL2-MIB
1.3.6.1.4.1.5504.4.2.1.1.1.14aal2VclFrameModeDataZhoneAAL2-MIB