All MIBs › Zhone-VOICE-ANALOG-IF-MIB › zhoneVaIfEMCfgSignalType
zhoneVaIfEMCfgSignalType
Module: Zhone-VOICE-ANALOG-IF-MIB
OID (symbolic): Zhone-VOICE-ANALOG-IF-MIB::zhoneVaIfEMCfgSignalType
OID (numeric): 1.3.6.1.4.1.5504.5.6.4.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The signaling type of E&M tie trunk interface. winkStart - the calling side seizes the line by going off-hook on its E lead but waits for a short off-hook 'wink' indication on its M lead from the called side before sending address information as DTMF digits. immediateDial - the calling side seizes the line by going off-hook on its E lead and sends sends address information as DTMF digits. delayDial - the calling side seizes the line by going off-hook on its E lead. After a timing interval, the calling side looks at the supervision from the called side. If the supervision is on-hook, the calling side starts sending information as DTMF digits; otherwise, the calling side waits until the called side goes on-hook and then starts sending address information. The default value of this object is winkStart(1).
What is zhoneVaIfEMCfgSignalType?
Reports the E&M tie-trunk signaling type in use: winkStart (the default, where the calling side waits for a brief off-hook 'wink' before sending digits), immediateDial (digits sent right after seizure), or delayDial (digits sent only after confirming the far end is ready). An admin reads this to understand exactly when a connected PBX expects address digits during call setup on this tie trunk.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.6.4.1.1.1 snmpwalk -v2c -c public <target> Zhone-VOICE-ANALOG-IF-MIB::zhoneVaIfEMCfgSignalType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.6.4.1.1.1.1 snmpget -v2c -c public <target> Zhone-VOICE-ANALOG-IF-MIB::zhoneVaIfEMCfgSignalType.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zhoneVaIfEMCfgSignalType.1
Start monitoring Zhone integrated access device / multiservice access node (E&M/FXS/FXO port hook/line status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Zhone-VOICE-ANALOG-IF-MIB::zhoneVaIfEMCfgSignalType OID value, configure state conditions and alerts, and monitor any Zhone integrated access device / multiservice access node (E&M/FXS/FXO port hook/line status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | zhone | Zhone |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.6 | zhoneVaIfObjects | Zhone-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.5504.5.6.4 | zhoneVaIfEMObjects | Zhone-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.5504.5.6.4.1 | zhoneVaIfEMCfgTable | Zhone-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.5504.5.6.4.1.1 | zhoneVaIfEMCfgEntry | Zhone-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.5504.5.6.4.1.1.1 | zhoneVaIfEMCfgSignalType | Zhone-VOICE-ANALOG-IF-MIB |