ZYXEL-VDSLLINE-MIB :: accessSwitchVdslVtuoPerfValidIntervals

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ZYXEL-VDSLLINE-MIB › accessSwitchVdslVtuoPerfValidIntervals

accessSwitchVdslVtuoPerfValidIntervals

Module: ZYXEL-VDSLLINE-MIB

OID (symbolic): ZYXEL-VDSLLINE-MIB::accessSwitchVdslVtuoPerfValidIntervals

OID (numeric): 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.

What is accessSwitchVdslVtuoPerfValidIntervals?

Reports how many of the previous 15-minute performance intervals actually have data collected for this VTU-O line, up to the device's maximum of 96; it's lower than the maximum right after the agent restarts or when some interval data is unavailable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7
snmpwalk -v2c -c public <target> ZYXEL-VDSLLINE-MIB::accessSwitchVdslVtuoPerfValidIntervals

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7.1
snmpget -v2c -c public <target> ZYXEL-VDSLLINE-MIB::accessSwitchVdslVtuoPerfValidIntervals.1

Start monitoring ZyXEL VDSL DSLAM/line card, ZyXEL VDSL CPE modem (line-rate/SNR-margin/attenuation/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-VDSLLINE-MIB::accessSwitchVdslVtuoPerfValidIntervals OID value, configure state conditions and alerts, and monitor any ZyXEL VDSL DSLAM/line card, ZyXEL VDSL CPE modem (line-rate/SNR-margin/attenuation/error-counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.890zyxelIES5206-MIB
1.3.6.1.4.1.890.1productsIES5206-MIB
1.3.6.1.4.1.890.1.5accessSwitchIES5206-MIB
Numeric OIDNameModule
1.3.6.1.4.1.890.1.5.12.1.1accessSwitchVdslLineMibZYXEL-VDSLLINE-MIB
1.3.6.1.4.1.890.1.5.12.1.1.1accessSwitchVdslLineMibObjectsZYXEL-VDSLLINE-MIB
1.3.6.1.4.1.890.1.5.12.1.1.1.6accessSwitchVdslVtuoPerfDataTableZYXEL-VDSLLINE-MIB
1.3.6.1.4.1.890.1.5.12.1.1.1.6.1accessSwitchVdslVtuoPerfDataEntryZYXEL-VDSLLINE-MIB
1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7accessSwitchVdslVtuoPerfValidIntervalsZYXEL-VDSLLINE-MIB

Module

This MIB depends on