ZYXEL-SNMP-MIB

All MIBs › ZYXEL-SNMP-MIB

Organization: Enterprise Solution ZyXEL

Last Updated: 2012-07-01

Category: ZyXEL System and Hardware Management

Description: Manages ZyXEL SNMP agent settings including community strings, trap destinations, and access control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-SNMP-MIB?

ZYXEL-SNMP-MIB is a ZyXEL private enterprise MIB managing the device's own SNMP agent settings, including community strings, trap destinations, and access control. It exposes SNMP agent configuration data rather than network or hardware telemetry, essentially meta-management of the monitoring channel itself. Monitoring this MIB is about confirming the management plane is correctly configured, verifying trap destinations point to the right NMS and access-control settings have not been tampered with, a software/configuration integrity check underpinning all other monitoring. It extends the standard SNMPv2-MIB/SNMP-COMMUNITY-MIB framework with ZyXEL-specific agent configuration objects. It is deployed on any ZyXEL managed device where an administrator audits or manages SNMP community strings and trap destinations as part of securing device management. Engineers can download the ZYXEL-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL managed switch

Monitoring Examples

No object/table names were present in the sampled data. Per the module description ("the subtree for Simple Network Management Protocol"), the module exposes community-string and trap-destination configuration that an administrator audits to confirm SNMP access control and trap delivery are correctly configured.

What Can Be Monitored

SNMP community string configuration
trap destination addresses
SNMP access control settings

Imported Objects

From BRIDGE-MIB

dot1dBasePort

OBJECT-TYPE

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From ZYXEL-ES-SMI

esMgmt

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zyxelSnmp	1.3.6.1.4.1.890.1.15.3.76			The subtree for Simple Network Management Protocol (SNMP)
zyxelSnmpSetup	1.3.6.1.4.1.890.1.15.3.76.1
STR zySnmpGetCommunity	1.3.6.1.4.1.890.1.15.3.76.1.1	DisplayString	read-write	This is the password for the incoming Get- and getNext- requests from the management station. This string is only used by SNMP managers using SNMP version 2c or lower.
STR zySnmpSetCommunity	1.3.6.1.4.1.890.1.15.3.76.1.2	DisplayString	read-write	This is the password for the incoming Set- and SetNext- requests from the management station. This string is only used by SNMP managers using SNMP version 2c or lower.
STR zySnmpTrapCommunity	1.3.6.1.4.1.890.1.15.3.76.1.3	DisplayString	read-write	This is the password sent with each trap to the SNMP manager. This string is only used by SNMP managers using SNMP version 2c or lower.
INT zySnmpTrapDestinationMaxNumberOfDestinations	1.3.6.1.4.1.890.1.15.3.76.1.4	INTEGER	read-only	The maximum number of snmp destination entries that can be created.
zyxelSnmpTrapDestinationTable	1.3.6.1.4.1.890.1.15.3.76.1.5		not-accessible	The table contains SNMP trap destination configuration.
zyxelSnmpTrapDestinationEntry	1.3.6.1.4.1.890.1.15.3.76.1.5.1		not-accessible	An entry contains SNMP trap destination configuration.
IP zySnmpTrapDestinationIpAddress	1.3.6.1.4.1.890.1.15.3.76.1.5.1.1	IpAddress	not-accessible	Destination IP address of trap server.
INT zySnmpTrapDestinationUdpPort	1.3.6.1.4.1.890.1.15.3.76.1.5.1.2	INTEGER	read-write	The UDP port that the manager listens for SNMP traps.
INT zySnmpTrapDestinationVersion	1.3.6.1.4.1.890.1.15.3.76.1.5.1.3	INTEGER	read-write	Specify the version of the SNMP trap messages.
STR zySnmpTrapDestinationUserName	1.3.6.1.4.1.890.1.15.3.76.1.5.1.4	DisplayString	read-write	Username that is sent to the SNMP manager along with the SNMP v3 trap. This username must match an existing account on the switch.
ROW zySnmpTrapDestinationRowStatus	1.3.6.1.4.1.890.1.15.3.76.1.5.1.5	RowStatus	read-create	This object allow entries to be created and deleted from SNMP trap destination table.
INT zySnmpVersion	1.3.6.1.4.1.890.1.15.3.76.1.6	INTEGER	read-write	Select the SNMP version for the switch. The SNMP version on the switch must match the version on the SNMP manager. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c.
zyxelSnmpUserTable	1.3.6.1.4.1.890.1.15.3.76.1.7		not-accessible	The table contains SNMP user configuration.
zyxelSnmpUserEntry	1.3.6.1.4.1.890.1.15.3.76.1.7.1		not-accessible	An entry contains SNMP user configuration.
STR zySnmpUserName	1.3.6.1.4.1.890.1.15.3.76.1.7.1.1	DisplayString	not-accessible	The username of a login account on the switch.
INT zySnmpUserSecurityLevel	1.3.6.1.4.1.890.1.15.3.76.1.7.1.2	INTEGER	read-only	Select whether you want to implement authentication and/or encryption for SNMP communication from this user.
INT zySnmpUserAuthenticationProtocol	1.3.6.1.4.1.890.1.15.3.76.1.7.1.3	INTEGER	read-only	The type of authentication protocol to be used.
INT zySnmpUserPrivacyProtocol	1.3.6.1.4.1.890.1.15.3.76.1.7.1.4	INTEGER	read-only	The type of privacy protocol to be used.
STR zySnmpUserGroup	1.3.6.1.4.1.890.1.15.3.76.1.7.1.5	DisplayString	read-only	The group name which this user belongs to.
zyxelSnmpTrapGroupTable	1.3.6.1.4.1.890.1.15.3.76.1.8		not-accessible	The table cantains SNMP trap group configuration.
zyxelSnmpTrapGroupEntry	1.3.6.1.4.1.890.1.15.3.76.1.8.1		not-accessible	An entry cantains SNMP trap group configuration.
BIT zySnmpTrapSysGroup	1.3.6.1.4.1.890.1.15.3.76.1.8.1.1	Bits	read-write	System group of SNMP trap that the switch sends to the SNMP manager.
BIT zySnmpTrapInterfaceGroup	1.3.6.1.4.1.890.1.15.3.76.1.8.1.2	Bits	read-write	Interface group of SNMP trap that the switch sends to the SNMP manager.
BIT zySnmpTrapAAAGroup	1.3.6.1.4.1.890.1.15.3.76.1.8.1.3	Bits	read-write	AAA group of SNMP trap that the switch sends to the SNMP manager.
BIT zySnmpTrapIPGroup	1.3.6.1.4.1.890.1.15.3.76.1.8.1.4	Bits	read-write	IP group of SNMP trap that the switch sends to the SNMP manager.
BIT zySnmpTrapSwitchGroup	1.3.6.1.4.1.890.1.15.3.76.1.8.1.5	Bits	read-write	Switch group of SNMP trap that the switch sends to the SNMP manager.
zyxelSnmpTrapPortTable	1.3.6.1.4.1.890.1.15.3.76.1.9		not-accessible	The table contains SNMP trap port configuration.
zyxelSnmpTrapPortEntry	1.3.6.1.4.1.890.1.15.3.76.1.9.1		not-accessible	An entry contains SNMP trap port configuration.
ENA zySnmpTrapPortIntrusionlockState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.1	EnabledStatus	read-write	Enabled/Disabled SNMP intrusionlock trap on the sepcified port.
ENA zySnmpTrapPortLoopguardState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.2	EnabledStatus	read-write	Enabled/Disabled SNMP loopguard trap on the sepcified port.
ENA zySnmpTrapPortErrdisableState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.3	EnabledStatus	read-write	Enabled/Disabled SNMP errdisable trap on the sepcified port.
ENA zySnmpTrapPortPoeState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.4	EnabledStatus	read-write	Enabled/Disabled SNMP PoE trap on the sepcified port.
ENA zySnmpTrapPortLinkupState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.5	EnabledStatus	read-write	Enabled/Disabled SNMP linkUp trap on the sepcified port.
ENA zySnmpTrapPortLinkdownState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.6	EnabledStatus	read-write	Enabled/Disabled SNMP linkDown trap on the sepcified port.
ENA zySnmpTrapPortAutonegotiationState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.7	EnabledStatus	read-write	Enabled/Disabled SNMP LLDP trap on the sepcified port.
ENA zySnmpTrapPortLldpState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.8	EnabledStatus	read-write	Enabled/Disabled SNMP autonegotiation trap on the sepcified port.
ENA zySnmpTrapPortTransceiverDdmState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.9	EnabledStatus	read-write	Enabled/Disabled SNMP Transceiver-ddm trap on the sepcified port.
ENA zySnmpTrapPortStormControlState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.10	EnabledStatus	read-write	Enabled/Disabled SNMP storm-control trap on the sepcified port.
ENA zySnmpTrapPortZuldState	1.3.6.1.4.1.890.1.15.3.76.1.9.1.11	EnabledStatus	read-write	Enabled/Disabled SNMP ZULD trap on the sepcified port.

RFC description

Zyxel enterprise SNMP configuration including community strings and user management.

Start monitoring ZyXEL managed switch (SNMP community/trap-destination/access-control config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-SNMP-MIB

What Is ZYXEL-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description