ZYXEL-SYSTEM-MIB

All MIBs › ZYXEL-SYSTEM-MIB

Organization: Enterprise Solution ZyXEL

Last Updated: 2012-07-01

Category: ZyXEL System and Hardware Management

Description: Provides ZyXEL switch system information including hardware description, uptime, and software version.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-SYSTEM-MIB?

ZYXEL-SYSTEM-MIB is a ZyXEL vendor MIB providing core system-level information for ZyXEL switches, covering hardware description, device uptime, and running software version. As a system subtree module it is one of the most fundamental building blocks for basic device health monitoring, giving a management station the essentials needed to confirm a switch is alive and identify exactly what hardware and firmware it is running. Its explicit monitoring value lies in uptime tracking (to detect unexpected reboots), hardware description (to confirm the correct model is deployed), and software version (to verify firmware compliance across a fleet), all software/hardware status fundamentals rather than deep performance counters. It closely parallels the standard SNMPv2-MIB system group (sysDescr, sysUpTime) but is ZyXEL-specific, likely supplementing rather than replacing the standard system MIB. It is deployed across ZyXEL managed switch installations in SMB and enterprise networks where basic fleet-wide health and version tracking is needed. Engineers can download the ZYXEL-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL managed switch

Monitoring Examples

No specific object names were provided in the sample data for this module (the module_desc only references 'the subtree for system'), so exact table/object names cannot be cited with confidence; typically such a module would let an operator poll device uptime to detect an unplanned reboot and read the software version string to confirm firmware consistency across a fleet of ZyXEL switches.

Imported Objects

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From ZYXEL-ES-SMI

esMgmt

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zyxelSystem	1.3.6.1.4.1.890.1.15.3.82			The subtree for system
zyxelDateTimeSetup	1.3.6.1.4.1.890.1.15.3.82.1
INT zyDateTimeServerType	1.3.6.1.4.1.890.1.15.3.82.1.1	INTEGER	read-write	The time service protocol that your timeserver uses.
IP zyDateTimeServerIpAddress	1.3.6.1.4.1.890.1.15.3.82.1.2	IpAddress	read-write	IP address of time server.
INT zyDateTimeZone	1.3.6.1.4.1.890.1.15.3.82.1.3	INTEGER	read-write	The time difference between UTC and your time zone. Ex: +01
INT zyDateTimeNewDateYear	1.3.6.1.4.1.890.1.15.3.82.1.4	INTEGER	read-write	The new date in year.
INT zyDateTimeNewDateMonth	1.3.6.1.4.1.890.1.15.3.82.1.5	INTEGER	read-write	The new date in month.
INT zyDateTimeNewDateDay	1.3.6.1.4.1.890.1.15.3.82.1.6	INTEGER	read-write	The new date in day.
INT zyDateTimeNewTimeHour	1.3.6.1.4.1.890.1.15.3.82.1.7	INTEGER	read-write	The new time in hour.
INT zyDateTimeNewTimeMinute	1.3.6.1.4.1.890.1.15.3.82.1.8	INTEGER	read-write	The new time in minute.
INT zyDateTimeNewTimeSecond	1.3.6.1.4.1.890.1.15.3.82.1.9	INTEGER	read-write	The new time in second.
zyxelDateTimeDaylightSavingTimeSetup	1.3.6.1.4.1.890.1.15.3.82.1.10
ENA zyDaylightSavingTimeState	1.3.6.1.4.1.890.1.15.3.82.1.10.1	EnabledStatus	read-write	Enable/Disable Daylight Saving Time service for the switch. Daylight saving is a period from late spring to early fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening.
INT zyDaylightSavingTimeStartDateWeek	1.3.6.1.4.1.890.1.15.3.82.1.10.2	INTEGER	read-write	Start week of Daylight Saving Time service.
INT zyDaylightSavingTimeStartDateDay	1.3.6.1.4.1.890.1.15.3.82.1.10.3	INTEGER	read-write	Start day of Daylight Saving Time service.
INT zyDaylightSavingTimeStartDateMonth	1.3.6.1.4.1.890.1.15.3.82.1.10.4	INTEGER	read-write	Start month of Daylight Saving Time service.
INT zyDaylightSavingTimeStartDateHour	1.3.6.1.4.1.890.1.15.3.82.1.10.5	INTEGER	read-write	Start time of Daylight Saving Time service.
INT zyDaylightSavingTimeEndDateWeek	1.3.6.1.4.1.890.1.15.3.82.1.10.6	INTEGER	read-write	End week of Daylight Saving Time service.
INT zyDaylightSavingTimeEndDateDay	1.3.6.1.4.1.890.1.15.3.82.1.10.7	INTEGER	read-write	End day of Daylight Saving Time service.
INT zyDaylightSavingTimeEndDateMonth	1.3.6.1.4.1.890.1.15.3.82.1.10.8	INTEGER	read-write	End month of Daylight Saving Time service.
INT zyDaylightSavingTimeEndDateHour	1.3.6.1.4.1.890.1.15.3.82.1.10.9	INTEGER	read-write	End time of Daylight Saving Time service.
zyxelSysInfo	1.3.6.1.4.1.890.1.15.3.82.2
INT zySysSwPlatformMajorVers	1.3.6.1.4.1.890.1.15.3.82.2.1	INTEGER	read-only	Software platform major version, e.g. 3.
INT zySysSwPlatformMinorVers	1.3.6.1.4.1.890.1.15.3.82.2.2	INTEGER	read-only	Software platform minor version, e.g. 50.
STR zySysSwModelString	1.3.6.1.4.1.890.1.15.3.82.2.3	DisplayString	read-only	Software model letters, e.g. TJ.
INT zySysSwVersionControlNbr	1.3.6.1.4.1.890.1.15.3.82.2.4	INTEGER	read-only	Software version control number, e.g. 0.
INT zySysSwDay	1.3.6.1.4.1.890.1.15.3.82.2.5	INTEGER	read-only	Software compilation day, e.g. 19.
INT zySysSwMonth	1.3.6.1.4.1.890.1.15.3.82.2.6	INTEGER	read-only	Software compilation month, e.g. 8.
INT zySysSwYear	1.3.6.1.4.1.890.1.15.3.82.2.7	INTEGER	read-only	Software compilation year, e.g. 2004.
INT zySysHwMajorVers	1.3.6.1.4.1.890.1.15.3.82.2.8	INTEGER	read-only	Hardware major version, e.g. 1.
INT zySysHwMinorVers	1.3.6.1.4.1.890.1.15.3.82.2.9	INTEGER	read-only	Hardware minor version, e.g. 0.
STR zySysSerialNumber	1.3.6.1.4.1.890.1.15.3.82.2.10	DisplayString	read-only	Serial number.
INT zySysSwBootUpImage	1.3.6.1.4.1.890.1.15.3.82.2.11	INTEGER	read-only	Current system boot up image. You can change the boot up image of next rebooting by setting sysMgmtBootupImage.
zyxelDateTimeTrapNotifications	1.3.6.1.4.1.890.1.15.3.82.3
NTF zyDateTimeTrapTimeServerNotReachable	1.3.6.1.4.1.890.1.15.3.82.3.1			Real time clock is not up to date. It has not been configured manually or time server is unreachable.
NTF zyDateTimeTrapTimeServerNotReachableRecovered	1.3.6.1.4.1.890.1.15.3.82.3.2			Real time clock is up to date.

RFC description

Provides system-level configuration for ZyXEL devices including date/time and system information.

Start monitoring ZyXEL managed switch (hardware-description/uptime/software-version status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-SYSTEM-MIB

What Is ZYXEL-SYSTEM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description