All MIBs › ZYXEL-PROWIRELESS-MIB › pwSystemReboot
pwSystemReboot
Module: ZYXEL-PROWIRELESS-MIB
OID (symbolic): ZYXEL-PROWIRELESS-MIB::pwSystemReboot
OID (numeric): 1.3.6.1.4.1.890.1.9.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: System Reboot.
What is pwSystemReboot?
Reports or triggers a device reboot: reading running(0) means the device is operating normally, while writing reboot(1) restarts the device, typically after a firmware or configuration update via TFTP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.9.1.8 snmpwalk -v2c -c public <target> ZYXEL-PROWIRELESS-MIB::pwSystemReboot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.9.1.8.1 snmpget -v2c -c public <target> ZYXEL-PROWIRELESS-MIB::pwSystemReboot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.9.1.8.1 i <value>
Start monitoring ZyXEL wireless access point (client-association/rogue-AP-detection/firmware-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-PROWIRELESS-MIB::pwSystemReboot OID value, configure state conditions and alerts, and monitor any ZyXEL wireless access point (client-association/rogue-AP-detection/firmware-version status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | NWA1100 |
| 1.3.6.1.4.1.890.1 | nwaSeries | NWA1100 |
| 1.3.6.1.4.1.890.1.9 | nwa1100 | NWA1100 |
| 1.3.6.1.4.1.890.1.9.1 | pwCommon | NWA1100 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.9.1.8 | pwSystemReboot | ZYXEL-PROWIRELESS-MIB |