ZYXEL-NWA-SERIES-v1-4-2

All MIBs › ZYXEL-NWA-SERIES-v1-4-2

Category: ZyXEL Wireless LAN

Description: Defines ZyXEL NWA series v1.4.2 wireless access point objects with firmware-specific management extensions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-NWA-SERIES-v1-4-2?

ZYXEL-NWA-SERIES-v1-4-2 is a vendor-specific SNMP module for ZyXEL's NWA series wireless access points, tied to firmware version 1.4.2, extending standard wireless management with ZyXEL-specific objects. It exposes data on associated wireless client stations and on rogue access point detection, giving administrators visibility into who is connected to the AP and whether unauthorized APs are present nearby. This is primarily a wireless software/service-status MIB: it lets administrators monitor client association status and duration, verify SSID assignment per station, and check whether the rogue-AP detection feature is actively scanning at its configured interval, all of which reflect the operational health of the AP's wireless service rather than internal hardware sensors. As a wireless MIB it implicitly depends on standard 802.11 wireless concepts (SSID, MAC association) even though it is a ZyXEL-proprietary extension rather than built on a shared IEEE 802.11 MIB. It is typically deployed on ZyXEL NWA-series access points in SMB or branch-office WLAN deployments running the 1.4.2 firmware line. Engineers can download the ZYXEL-NWA-SERIES-v1-4-2 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-NWA-SERIES-v1-4-2. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL NWA-series wireless access points (firmware 1.4.2)

Monitoring Examples

An administrator would poll pwStationTable to enumerate connected clients via pwStationIndex, reading pwStationMacAddress, pwStationSSID, pwStationAssociateTime, and pwStationStatus to see which devices are connected, to which SSID, for how long, and in what state. Separately, polling pwRogueAPPeriodTable for pwRogueAPPeriodDetection and pwRogueAPPeriod would confirm whether rogue AP scanning is enabled and running on its configured interval. A pwStationStatus flipping repeatedly for the same pwStationMacAddress could indicate a client with a poor wireless connection experiencing frequent re-association.

What Can Be Monitored

connected wireless client stations
client SSID assignment
client association duration
client connection status
rogue AP detection status
rogue AP scan interval

Imported Objects

From RFC1155-SMI

Counter
Counter32
Integer32
IpAddress
NetworkAddress
PhysAddress
enterprises

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
RowPointer
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
nwa1100	1.3.6.1.4.1.890.1.9.100.7
nwa3100	1.3.6.1.4.1.890.1.9.100.1
nwa3160	1.3.6.1.4.1.890.1.9.100.3
nwa3163	1.3.6.1.4.1.890.1.9.100.4
nwa3165	1.3.6.1.4.1.890.1.9.100.6
nwa3166	1.3.6.1.4.1.890.1.9.100.8
nwa3500	1.3.6.1.4.1.890.1.9.100.2
nwa3550	1.3.6.1.4.1.890.1.9.100.5
nwaSeries	1.3.6.1.4.1.890.1.9.100
products	1.3.6.1.4.1.890.1
proWireless	1.3.6.1.4.1.890.1.9
STR pwAutoCfgMessage	1.3.6.1.4.1.890.1.9.1.9	DisplayString	read-only	The last error massage of Auto Configuration process.
INT pwAutoChannelSelection	1.3.6.1.4.1.890.1.9.5.1.1.6	INTEGER	read-write	Enable/disable Auto Channel Selection.
STR pwCfgVersion	1.3.6.1.4.1.890.1.9.1.2	DisplayString	read-only	The current WLAN configuration version.
pwCommon	1.3.6.1.4.1.890.1.9.1
OCT pwCPUUsage	1.3.6.1.4.1.890.1.9.1.10	OCTET STRING	read-only	Display the CPU usage information
INT pwCurrentChannel	1.3.6.1.4.1.890.1.9.5.1.1.7	INTEGER	read-only	Current Operating channel.
C32 pwDot11ACKFailureCount	1.3.6.1.4.1.890.1.9.6.1.1.3	Counter32	read-only	This counter shall increment when an ACK is not received when expected.
C32 pwDot11FailedCount	1.3.6.1.4.1.890.1.9.6.1.1.1	Counter32	read-only	This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit.
C32 pwDot11ReceivedFragmentCount	1.3.6.1.4.1.890.1.9.6.1.1.4	Counter32	read-only	This counter shall be incremented for each successfully received MPDU of type Data or Management.
C32 pwDot11ReceivedPktCount	1.3.6.1.4.1.890.1.9.6.1.1.6	Counter32	read-only	This counter shall increment for each successfully received packets every five minutes.
C32 pwDot11ReceptionRate	1.3.6.1.4.1.890.1.9.6.1.1.8	Counter32	read-only	Reception Rate in Byte per second.
C32 pwDot11RetryCount	1.3.6.1.4.1.890.1.9.6.1.1.2	Counter32	read-only	This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions.
C32 pwDot11TransmissionRate	1.3.6.1.4.1.890.1.9.6.1.1.9	Counter32	read-only	Transmission Rate in Byte per second.
C32 pwDot11TransmittedFrameCount	1.3.6.1.4.1.890.1.9.6.1.1.5	Counter32	read-only	This counter shall increment for each successfully transmitted MSDU.
C32 pwDot11TransmittedPktCount	1.3.6.1.4.1.890.1.9.6.1.1.7	Counter32	read-only	This counter shall increment for each successfully transmitted packets every five minutes.
OCT pwFriendlyAPChannel	1.3.6.1.4.1.890.1.9.4.3.1.4	OCTET STRING	read-only	The frequency channel ID.
OCT pwFriendlyAPDescription	1.3.6.1.4.1.890.1.9.4.3.1.7	OCTET STRING	read-write	Description of friendly AP. When setting this item, the description field of relative entry will be updated
pwFriendlyAPEntry	1.3.6.1.4.1.890.1.9.4.3.1		not-accessible	An entry describing the neighbor Friendly AP information.
INT pwFriendlyAPIndex	1.3.6.1.4.1.890.1.9.4.3.1.1	INTEGER	read-only	The index of neighbor friendly AP table.
OCT pwFriendlyAPMacAddress	1.3.6.1.4.1.890.1.9.4.3.1.3	OCTET STRING	read-write	The friendly AP MAC address. When setting this item, a new entry of frienly AP will be added.
OCT pwFriendlyAPSecurity	1.3.6.1.4.1.890.1.9.4.3.1.5	OCTET STRING	read-only	The data security mode.
OCT pwFriendlyAPSignal	1.3.6.1.4.1.890.1.9.4.3.1.6	OCTET STRING	read-only	The data signal.
OCT pwFriendlyAPSSID	1.3.6.1.4.1.890.1.9.4.3.1.2	OCTET STRING	read-only	The SSID. If SSID of the friendly AP is hidden, it will be displayed as '(Hidden SSID)'.
pwFriendlyAPTable	1.3.6.1.4.1.890.1.9.4.3		not-accessible	This table lists the neighbor Friendly AP.
OCT pwMemoryUsage	1.3.6.1.4.1.890.1.9.1.11	OCTET STRING	read-only	Display the memory usage information
STR pwPassword	1.3.6.1.4.1.890.1.9.1.14	DisplayString	write-only	Change system password.
OCT pwRogueAPChannel	1.3.6.1.4.1.890.1.9.4.2.1.4	OCTET STRING	read-only	The frequency channel ID.
pwRogueAPDetect	1.3.6.1.4.1.890.1.9.4
pwRogueAPDetectEntry	1.3.6.1.4.1.890.1.9.4.2.1		not-accessible	An entry describing the neighbor AP information.
pwRogueAPDetectTable	1.3.6.1.4.1.890.1.9.4.2		not-accessible	This table lists the neighbor AP.
INT pwRogueAPExpirationTime	1.3.6.1.4.1.890.1.9.4.1.1.3	INTEGER	read-write	Rogue AP Expiration time. 30~180(min).
INT pwRogueAPIndex	1.3.6.1.4.1.890.1.9.4.2.1.1	INTEGER	read-only	The index of neighbor AP table.
OCT pwRogueAPMacAddress	1.3.6.1.4.1.890.1.9.4.2.1.3	OCTET STRING	read-only	The MAC address.
INT pwRogueAPPeriod	1.3.6.1.4.1.890.1.9.4.1.1.2	INTEGER	read-write	Rogue AP period time. 10~60(min).
INT pwRogueAPPeriodDetection	1.3.6.1.4.1.890.1.9.4.1.1.1	INTEGER	read-write	Control rogue AP Period Detection. enable(1) or disable(0).
pwRogueAPPeriodEntry	1.3.6.1.4.1.890.1.9.4.1.1		not-accessible	An entry describing the control for rogue AP Period Detection.
pwRogueAPPeriodTable	1.3.6.1.4.1.890.1.9.4.1		not-accessible	This table lists the rogue AP Period Detection.
OCT pwRogueAPSecurity	1.3.6.1.4.1.890.1.9.4.2.1.5	OCTET STRING	read-only	The data security mode.
OCT pwRogueAPSignal	1.3.6.1.4.1.890.1.9.4.2.1.6	OCTET STRING	read-only	The data signal.
OCT pwRogueAPSSID	1.3.6.1.4.1.890.1.9.4.2.1.2	OCTET STRING	read-only	The SSID. If SSID of the AP is hidden, it will be displayed as '(Hidden SSID)'.
pwSecurityTraps	1.3.6.1.4.1.890.1.9.2.3.2
OCT pwStationAssociateTime	1.3.6.1.4.1.890.1.9.3.2.1.3	OCTET STRING	read-only	The associated time of the station.
C32 pwStationCount	1.3.6.1.4.1.890.1.9.5.1.1.8	Counter32	read-only	The total number of ssocited stations
pwStationEntry	1.3.6.1.4.1.890.1.9.3.2.1		not-accessible	An entry describing the station information.
I32 pwStationIndex	1.3.6.1.4.1.890.1.9.3.2.1.1	Integer32	not-accessible	Index of stations.
OCT pwStationMacAddress	1.3.6.1.4.1.890.1.9.3.2.1.2	OCTET STRING	read-only	The MAC Addresss of the station.
pwStations	1.3.6.1.4.1.890.1.9.3
OCT pwStationSSID	1.3.6.1.4.1.890.1.9.3.2.1.4	OCTET STRING	read-only	The associated ssid.
ROW pwStationStatus	1.3.6.1.4.1.890.1.9.3.2.1.5	RowStatus	read-only	Controls and reflects the status of rows in this the row is active.
pwStationTable	1.3.6.1.4.1.890.1.9.3.2		not-accessible	This table lists the associated stations.
STR pwSwVersion	1.3.6.1.4.1.890.1.9.1.1	DisplayString	read-only	The current software version.
OCT pwSystemCountry	1.3.6.1.4.1.890.1.9.1.13	OCTET STRING	read-only	The country of wlan
INT pwSystemReboot	1.3.6.1.4.1.890.1.9.1.8	INTEGER	read-write	System Reboot.
STR pwTftpFileName	1.3.6.1.4.1.890.1.9.1.4	DisplayString	read-write	TFTP file name in TFTP server.
INT pwTftpFileType	1.3.6.1.4.1.890.1.9.1.5	INTEGER	read-write	File type in TFTP server.
INT pwTftpOpCommand	1.3.6.1.4.1.890.1.9.1.7	INTEGER	read-write	TFTP Operation Command.
INT pwTftpOpStatus	1.3.6.1.4.1.890.1.9.1.6	INTEGER	read-only	TFTP Operation Status.
IP pwTftpServer	1.3.6.1.4.1.890.1.9.1.3	IpAddress	read-write	TFTP download server IP Address.
NTF pwTFTPStatus	1.3.6.1.4.1.890.1.9.2.3.3.1			Send when TFTP operation completed, or stopped due to some reason. For example, timeout or wrong configuration.
pwTFTPTraps	1.3.6.1.4.1.890.1.9.2.3.3
pwTrapControl	1.3.6.1.4.1.890.1.9.2.1
STR pwTrapGenericMessage	1.3.6.1.4.1.890.1.9.2.2.1	DisplayString	accessible-for-notify	Provide generic information on traps.
STR pwTrapMACAddress	1.3.6.1.4.1.890.1.9.2.2.2	DisplayString	accessible-for-notify	Represents MAC address of the device or the host which triggers the trap.
pwTraps	1.3.6.1.4.1.890.1.9.2
INT pwTrapSecurityStatus	1.3.6.1.4.1.890.1.9.2.1.2	INTEGER	read-write	Controls security group traps enable or disable.
INT pwTrapTFTPStatus	1.3.6.1.4.1.890.1.9.2.1.3	INTEGER	read-write	Controls TFTP group traps enable or disable.
pwTrapTypes	1.3.6.1.4.1.890.1.9.2.3
pwTrapVariables	1.3.6.1.4.1.890.1.9.2.2
INT pwTrapWirelessStatus	1.3.6.1.4.1.890.1.9.2.1.1	INTEGER	read-write	Controls wireless group traps enable or disable.
STR pwTrapWlanSSID	1.3.6.1.4.1.890.1.9.2.2.3	DisplayString	accessible-for-notify	The SSID name which the wireless client associates.
pwWirelessTraps	1.3.6.1.4.1.890.1.9.2.3.1
INT pwWlanChannel	1.3.6.1.4.1.890.1.9.5.1.1.4	INTEGER	read-write	The current channel of wlan right now. When setting this parameter, the value should be a subset of all supported channel
pwWlanControl	1.3.6.1.4.1.890.1.9.5
pwWlanControlEntry	1.3.6.1.4.1.890.1.9.5.1.1		not-accessible	An entry describing WLAN control information for each chip.
pwWlanControlTable	1.3.6.1.4.1.890.1.9.5.1		not-accessible	This table lists WLAN control information. Use chipIndex as the index of each entry
INT pwWlanMode	1.3.6.1.4.1.890.1.9.5.1.1.1	INTEGER	read-write	The mode of wlan right now.
NTF pwWlanStaAssociation	1.3.6.1.4.1.890.1.9.2.3.1.1			Wireless client assocication notification.
NTF pwWlanStaAuthFail	1.3.6.1.4.1.890.1.9.2.3.2.1			Wireless client authentication failed.
NTF pwWlanStaDisassociation	1.3.6.1.4.1.890.1.9.2.3.1.2			Wireless client disassocication notification.
pwWlanStatistics	1.3.6.1.4.1.890.1.9.6
pwWlanStatisticsEntry	1.3.6.1.4.1.890.1.9.6.1.1		not-accessible	An entry describing WLAN statistics information.
pwWlanStatisticsTable	1.3.6.1.4.1.890.1.9.6.1		not-accessible	This table lists WLAN statistics information. Use chipIndex as the index of each entry
OCT pwWlanSupportedChannel	1.3.6.1.4.1.890.1.9.5.1.1.3	OCTET STRING	read-only	The all channel supported by wlan
OCT pwWlanSupportedMode	1.3.6.1.4.1.890.1.9.5.1.1.9	OCTET STRING	read-only	The all mode supported by wlan
INT pwWlanTxPower	1.3.6.1.4.1.890.1.9.5.1.1.5	INTEGER	read-write	To specify the RF transmission power.
zyxel	1.3.6.1.4.1.890

RFC description

ZyXEL NWA wireless access point series management MIB. Monitors and configures wireless LAN status, station associations, and rogue AP detection.

Start monitoring ZyXEL NWA-series wireless access points, firmware 1.4.2 (client-association/rogue-AP-detection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-NWA-SERIES-v1-4-2

What Is ZYXEL-NWA-SERIES-v1-4-2?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description