All MIBs › ZYXEL-PROWIRELESS-MIB › pwAPDetectInterval
pwAPDetectInterval
Module: ZYXEL-PROWIRELESS-MIB
OID (symbolic): ZYXEL-PROWIRELESS-MIB::pwAPDetectInterval
OID (numeric): 1.3.6.1.4.1.890.1.9.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: AP Detection Interval, time unit is minute. Minimum value is 3 minutes.
What is pwAPDetectInterval?
Sets how often, in minutes, the device scans for neighboring access points (minimum 3 minutes); the only named value, disable(0), turns off periodic neighbor-AP scanning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.9.4.1 snmpwalk -v2c -c public <target> ZYXEL-PROWIRELESS-MIB::pwAPDetectInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.9.4.1.1 snmpget -v2c -c public <target> ZYXEL-PROWIRELESS-MIB::pwAPDetectInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.9.4.1.1 i <value>
Start monitoring ZyXEL wireless access point (client-association/rogue-AP-detection/firmware-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-PROWIRELESS-MIB::pwAPDetectInterval OID value, configure state conditions and alerts, and monitor any ZyXEL wireless access point (client-association/rogue-AP-detection/firmware-version status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | NWA1100 |
| 1.3.6.1.4.1.890.1 | nwaSeries | NWA1100 |
| 1.3.6.1.4.1.890.1.9 | nwa1100 | NWA1100 |
| 1.3.6.1.4.1.890.1.9.4 | pwRogueAPDetect | ZYXEL-NWA-SERIES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.9.4.1 | pwAPDetectInterval | ZYXEL-PROWIRELESS-MIB |