ZYXEL-POLICY-ROUTE-MIB

All MIBs › ZYXEL-POLICY-ROUTE-MIB

Organization: Enterprise Solution ZyXEL

Last Updated: 2012-07-01

Category: ZyXEL Routing and IP Services

Description: Manages ZyXEL policy-based routing rules for directing traffic based on source, destination, or protocol criteria.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-POLICY-ROUTE-MIB?

ZYXEL-POLICY-ROUTE-MIB is a ZyXEL Communications enterprise MIB that manages policy-based routing profiles and rules on ZyXEL enterprise switches, letting traffic be steered to a specific next hop based on criteria other than the destination-based routing table. The zyxelPolicyRouteProfileTable defines named profiles with an EnabledStatus flag (zyPolicyRouteProfileState) and RowStatus-controlled lifecycle, while the zyxelPolicyRouteTable holds the ordered rules within a profile, each identified by zyPolicyRouteSequence (1-64, evaluated in order) and carrying a permit/deny zyPolicyRouteStatement, a zyPolicyRouteCalssifier reference, and a zyPolicyRouteNextHop IP address. Because rules are evaluated strictly in sequence and a deny falls back to normal table-based routing, this is fundamentally a configuration/classification MIB rather than a traffic-counter MIB, and monitoring it is mainly about confirming which profiles/rules are active and correctly ordered. It depends on the P-BRIDGE-MIB for its EnabledStatus textual convention and the ZYXEL-ES-SMI enterprise tree for OID placement, and it is deployed on ZyXEL managed switches, and administrators can download the ZYXEL-POLICY-ROUTE-MIB MIB to audit or automate policy-route configuration.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-POLICY-ROUTE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL enterprise switches (ES/GS series)

Monitoring Examples

An operator walks zyxelPolicyRouteTable ordered by zyPolicyRouteSequence to confirm rule 1 through N still point traffic at the expected zyPolicyRouteNextHop, and checks zyPolicyRouteProfileState and zyPolicyRouteRowStatus; a profile left disabled or a rule with an unreachable next hop would silently fall traffic back to default routing instead of the intended path.

What Can Be Monitored

policy-route profile enable/disable state
policy rule sequence and permit/deny statement
rule next-hop IP address
row/profile creation-deletion status
maximum profile/rule counts

Imported Objects

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From ZYXEL-ES-SMI

esMgmt

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zyxelPolicyRoute	1.3.6.1.4.1.890.1.15.3.60			The subtree for policy route
zyxelPolicyRouteSetup	1.3.6.1.4.1.890.1.15.3.60.1
INT zyPolicyRouteMaxNumberOfProfiles	1.3.6.1.4.1.890.1.15.3.60.1.1	INTEGER	read-only	The maximum number of policy route profile that can be created.
zyxelPolicyRouteProfileTable	1.3.6.1.4.1.890.1.15.3.60.1.2		not-accessible	The table contains policy route profile configuration.
zyxelPolicyRouteProfileEntry	1.3.6.1.4.1.890.1.15.3.60.1.2.1		not-accessible	An entry contains policy route profile configuration.
ENA zyPolicyRouteProfileState	1.3.6.1.4.1.890.1.15.3.60.1.2.1.1	EnabledStatus	read-write	Enable/Disable this policy routing profile and rule in the profile.
STR zyPolicyRouteProfileName	1.3.6.1.4.1.890.1.15.3.60.1.2.1.2	DisplayString	not-accessible	A descriptive name for identification policy route profile.
ROW zyPolicyRouteProfileRowStatus	1.3.6.1.4.1.890.1.15.3.60.1.2.1.3	RowStatus	read-create	This object allows entries to be created and deleted from the policy route profile table.
INT zyPolicyRouteMaxNumberOfRules	1.3.6.1.4.1.890.1.15.3.60.1.3	INTEGER	read-only	The maximum number of policy route rule that can be created.
zyxelPolicyRouteTable	1.3.6.1.4.1.890.1.15.3.60.1.4		not-accessible	The table contains policy route rule configuration.
zyxelPolicyRouteEntry	1.3.6.1.4.1.890.1.15.3.60.1.4.1		not-accessible	An entry contains policy route rule configuration.
STR zyPolicyRouteProfile	1.3.6.1.4.1.890.1.15.3.60.1.4.1.1	DisplayString	not-accessible	The policy routing profile you configure.
INT zyPolicyRouteSequence	1.3.6.1.4.1.890.1.15.3.60.1.4.1.2	INTEGER	not-accessible	The rule number from 1 to 64. The ordering of your rules is important as rules are applied in turn.
INT zyPolicyRouteStatement	1.3.6.1.4.1.890.1.15.3.60.1.4.1.3	INTEGER	read-write	Statement of policy route rule. Select Permit to forward traffic that matches this rule to the gateway specified in the rule. Select Deny to disable the rule action and forward traffic that matches this rule according to the routing table on the switch.
STR zyPolicyRouteCalssifier	1.3.6.1.4.1.890.1.15.3.60.1.4.1.4	DisplayString	read-write	The available active classifiers you configure, which are not used by any policy rule or policy routing rule.
IP zyPolicyRouteNextHop	1.3.6.1.4.1.890.1.15.3.60.1.4.1.5	IpAddress	read-write	Next hop IP address if the incoming packets match the criteria. 0.0.0.0 means nothing be done.
ROW zyPolicyRouteRowStatus	1.3.6.1.4.1.890.1.15.3.60.1.4.1.6	RowStatus	read-create	This object allows entries to be created and deleted from the policy route rule table.

RFC description

Configures policy-based routing profiles on ZyXEL enterprise switches.

Start monitoring ZyXEL enterprise switches (ES/GS series) (policy-route profile/rule-sequence config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-POLICY-ROUTE-MIB

What Is ZYXEL-POLICY-ROUTE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description