ZYXEL-ES-Outsourcing

All MIBs › ZYXEL-ES-Outsourcing

Organization: Enterprise Solution ZyXEL

Last Updated: 2010-12-12

Category: ZyXEL Wireless LAN

Description: Defines ZyXEL ES series outsourcing management objects for delegated network service administration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-ES-Outsourcing?

ZYXEL-ES-Outsourcing is a small branch of ZyXEL's ES (Ethernet Switch) enterprise MIB tree reserved for objects related to the "Outsourcing" product line, under which ZyXEL delegates certain switch management functions to third-party or managed-service operators. No module description or sample objects were available for this instance, suggesting this branch functions primarily as an OID registration point/placeholder under which product-specific outsourcing objects are defined, rather than as a populated set of runtime data objects. As such it has limited direct value for hardware/software status monitoring on its own; any monitoring capability would come from child MIBs defined beneath this subtree for specific outsourced ZyXEL ES switch products. It depends on ZyXEL's broader ES switch enterprise MIB structure as its parent tree. It would be deployed in managed-service or carrier environments where a service provider manages ZyXEL ES switches on behalf of end customers, and a ZYXEL-ES-Outsourcing download typically accompanies the vendor's broader ES MIB package even though this particular branch carries no populated objects of its own.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-ES-Outsourcing. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL ES series managed Ethernet switch

Monitoring Examples

With no populated objects visible in this branch, there is no concrete monitoring scenario to describe -- it functions as a registration/placeholder subtree for outsourcing-related ZyXEL ES products rather than an active data-bearing module.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress

From ZYXEL-ES-SMI

esProductSpecific

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
esOutsourcing	1.3.6.1.4.1.890.1.15.4.2			The subtree for Outsourcing product line
wireless	1.3.6.1.4.1.890.1.15.4.2.1			Read/Write Wlan UI Setting
wlanRadioTable	1.3.6.1.4.1.890.1.15.4.2.1.1			Read/Write Wlan Radio Setting
OCT wlanESSID	1.3.6.1.4.1.890.1.15.4.2.1.1.1	OCTET STRING	read-write	Controls for wireless ESSID
INT wlanChannel	1.3.6.1.4.1.890.1.15.4.2.1.1.2	INTEGER	read-write	control for wireless channel
INT wlanRadioMode	1.3.6.1.4.1.890.1.15.4.2.1.1.3	INTEGER	read-write	control for wireless radio mode(802.11bgn / 802.11ng / 802.11bg / 802.11n only / 802.11g only / 802.11b only)
INT wlanChannelWidth	1.3.6.1.4.1.890.1.15.4.2.1.1.4	INTEGER	read-write	control for wireless channel width(Auto / 20MHz)
INT wlanTransmitPower	1.3.6.1.4.1.890.1.15.4.2.1.1.5	INTEGER	read-write	control for wireless transmit power(25% / 50% / 100%)
INT wlanBeaconInterval	1.3.6.1.4.1.890.1.15.4.2.1.1.6	INTEGER	read-write	control for wireless beacon interval(1~1000, default: 100)
INT wlanRTSThreshold	1.3.6.1.4.1.890.1.15.4.2.1.1.7	INTEGER	read-write	control for wireless RTS threshold (256~2432, default: 2432)
INT wlanFragmentationThreshold	1.3.6.1.4.1.890.1.15.4.2.1.1.8	INTEGER	read-write	control for wireless fragmentation threshold (800~2432, default:2346, even number only)
INT wlanPreambleType	1.3.6.1.4.1.890.1.15.4.2.1.1.9	INTEGER	read-write	control for wireless preamble type (dynamic / short / long)
wlanSecurityControl	1.3.6.1.4.1.890.1.15.4.2.1.2			Read/Write Wlan Security Control
INT wlanSecMode	1.3.6.1.4.1.890.1.15.4.2.1.2.1	INTEGER	read-write	Controls for wireless security mode. (Disable / WPA / WPA2 / WPA/WPA2 / WEP)
INT wlanWPAGroupKeyRekey	1.3.6.1.4.1.890.1.15.4.2.1.2.2	INTEGER	read-write	The re-key interval for WPA/WP2 Group Key. (default 86400 second. 1~86400)
INT wlan8021xSupport	1.3.6.1.4.1.890.1.15.4.2.1.2.3	INTEGER	read-write	Controls for 802.1x support. Disable(WPA with pre-shared key), Enable(WPA with Radius server)
OCT wlanWPAPreSharedKey	1.3.6.1.4.1.890.1.15.4.2.1.2.4	OCTET STRING	read-write	WPA pre-shared key(ASCII, 8~63 characters)
OCT wlanRadiusSrvInfo	1.3.6.1.4.1.890.1.15.4.2.1.2.5	OCTET STRING	read-write	Radius server IP/domain(ASCII)
INT wlanRadiusSrvAuthPort	1.3.6.1.4.1.890.1.15.4.2.1.2.6	INTEGER	read-write	Radius server authentication port (1~65535)
OCT wlanRadiusSrvSharedSecretKey	1.3.6.1.4.1.890.1.15.4.2.1.2.7	OCTET STRING	read-write	Radius server shared secret key
INT wlanRadiusSrvAuthMethod	1.3.6.1.4.1.890.1.15.4.2.1.2.8	INTEGER	read-write	802.1x authentication method. Open System/Shared Key/Both
INT wlanWEPEncryption	1.3.6.1.4.1.890.1.15.4.2.1.2.9	INTEGER	read-write	WEP encryption(64/128 bit)
INT wlanWEPMode	1.3.6.1.4.1.890.1.15.4.2.1.2.10	INTEGER	read-write	WEP mode(HEX/ASCII)
INT wlanWEPKeyIndex	1.3.6.1.4.1.890.1.15.4.2.1.2.11	INTEGER	read-write	WEP Key Index
OCT wlanWEPKey1	1.3.6.1.4.1.890.1.15.4.2.1.2.12	OCTET STRING	read-write	WEP Key 1 passphrase
OCT wlanWEPKey2	1.3.6.1.4.1.890.1.15.4.2.1.2.13	OCTET STRING	read-write	WEP Key 2 passphrase
OCT wlanWEPKey3	1.3.6.1.4.1.890.1.15.4.2.1.2.14	OCTET STRING	read-write	WEP Key 3 passphrase
OCT wlanWEPKey4	1.3.6.1.4.1.890.1.15.4.2.1.2.15	OCTET STRING	read-write	WEP Key 4 passphrase
INT wlanWEPAuthMethod	1.3.6.1.4.1.890.1.15.4.2.1.2.16	INTEGER	read-write	WEP authentication method. Open System/Shared Key/Both
wlanStatistics	1.3.6.1.4.1.890.1.15.4.2.1.3			Wlan Statistics
INT dot11TransmittedCount	1.3.6.1.4.1.890.1.15.4.2.1.3.1	INTEGER	read-only	This counter shows total bytes transmitted
INT dot11ReceivedCount	1.3.6.1.4.1.890.1.15.4.2.1.3.2	INTEGER	read-only	This counter shows total bytes received
INT dot11RetryCount	1.3.6.1.4.1.890.1.15.4.2.1.3.3	INTEGER	read-only	This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions.
INT wlanStationCount	1.3.6.1.4.1.890.1.15.4.2.1.3.4	INTEGER	read-only	number of associated stations
wlanTraps	1.3.6.1.4.1.890.1.15.4.2.1.4			Wlan Traps
wlanTrapsControl	1.3.6.1.4.1.890.1.15.4.2.1.4.1			The subtree for Wlan Traps
INT trapWirelessControl	1.3.6.1.4.1.890.1.15.4.2.1.4.1.1	INTEGER	read-write	Controls wireless group traps enable(1) or disable(2).
wlanTrapsFormat	1.3.6.1.4.1.890.1.15.4.2.1.4.2			The subtree for Wlan Traps Format
STR trapGenericMessage	1.3.6.1.4.1.890.1.15.4.2.1.4.2.1	DisplayString	accessible-for-notify	Provide generic information on traps.
MAC trapMACAddress	1.3.6.1.4.1.890.1.15.4.2.1.4.2.2	MacAddress	accessible-for-notify	Represents MAC address of the device or the host which triggers the trap.
STR trapWlanSSID	1.3.6.1.4.1.890.1.15.4.2.1.4.2.3	DisplayString	accessible-for-notify	The SSID name which the wireless client associates.
wlanTrapsItems	1.3.6.1.4.1.890.1.15.4.2.1.4.3			The subtree for Wlan Traps Items
NTF wlanStaAssociation	1.3.6.1.4.1.890.1.15.4.2.1.4.3.1			Wireless client assocication notification.
NTF wlanStaDisassociation	1.3.6.1.4.1.890.1.15.4.2.1.4.3.2			Wireless client disassocication notification.
NTF wlanStaAuthFail	1.3.6.1.4.1.890.1.15.4.2.1.4.3.3			Wireless client authentication failed.
deviceTraps	1.3.6.1.4.1.890.1.15.4.2.2			Device Traps
deviceTrapsControl	1.3.6.1.4.1.890.1.15.4.2.2.1			Device Traps Control
INT trapDeviceInfoControl	1.3.6.1.4.1.890.1.15.4.2.2.1.1	INTEGER	read-write	Controls devices information traps
deviceTrapsItems	1.3.6.1.4.1.890.1.15.4.2.2.2			Device Traps Items
NTF trapDeviceEthIPAddr	1.3.6.1.4.1.890.1.15.4.2.2.2.1			Devices Ethernet IP address
NTF trapDeviceEthMACAddr	1.3.6.1.4.1.890.1.15.4.2.2.2.2			Devices Ethernet MAC address

RFC description

Manages wireless (WLAN) and outsourced product configurations including radio settings, ESSID, channel selection, and security.

Start monitoring ZyXEL ES series managed Ethernet switch (Outsourcing product-line OID registration point, no populated objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-ES-Outsourcing

What Is ZYXEL-ES-Outsourcing?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description