All MIBs › ZXR10-SWITCH-MIB › zxr10pimSnoopingEnable
zxr10pimSnoopingEnable
Module: ZXR10-SWITCH-MIB
OID (symbolic): ZXR10-SWITCH-MIB::zxr10pimSnoopingEnable
OID (numeric): 1.3.6.1.4.1.3902.3.102.5.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Enables/disables PIM Snooping on this device
What is zxr10pimSnoopingEnable?
Turns PIM snooping on(0) or off(1) for the entire switch, the global master switch beneath the per-VLAN PIM snooping enable object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.5.5 snmpwalk -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10pimSnoopingEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.5.5.1 snmpget -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10pimSnoopingEnable.1
Start monitoring ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SWITCH-MIB::zxr10pimSnoopingEnable OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.5 | zxr10IgmpSnooping | ZXR10-IGMP-PIM-SNOOPING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102.5.5 | zxr10pimSnoopingEnable | ZXR10-SWITCH-MIB |