All MIBs › ZXR10-SWITCH-MIB › zxr10QinQExtendTpid
zxr10QinQExtendTpid
Module: ZXR10-SWITCH-MIB
OID (symbolic): ZXR10-SWITCH-MIB::zxr10QinQExtendTpid
OID (numeric): 1.3.6.1.4.1.3902.3.102.1.3.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The extend qinq tpid
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.1.3.2 snmpwalk -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10QinQExtendTpid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.1.3.2.1 snmpget -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10QinQExtendTpid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.1.3.2.1 i <value>
Start monitoring ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SWITCH-MIB::zxr10QinQExtendTpid OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | ZXR10-BFD-MIB |
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | ZXR10-DHCPSNOOPING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102.1 | zxr10vlan | ZXR10-SWITCH-MIB |
| 1.3.6.1.4.1.3902.3.102.1.3 | zxr10QinQ | ZXR10-SWITCH-MIB |
| 1.3.6.1.4.1.3902.3.102.1.3.2 | zxr10QinQExtendTpid | ZXR10-SWITCH-MIB |