All MIBs › ZXR10-SWITCH-MIB › zxr10OutputAlarmStatus
zxr10OutputAlarmStatus
Module: ZXR10-SWITCH-MIB
OID (symbolic): ZXR10-SWITCH-MIB::zxr10OutputAlarmStatus
OID (numeric): 1.3.6.1.4.1.3902.3.102.6.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: the status of alarm.
What is zxr10OutputAlarmStatus?
Reads or sets this output-alarm relay to active(1) or clear(0); unlike the read-only input alarm status, this one is writable so an admin or script can drive an external relay, e.g. to trigger a physical alarm bell.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.6.2.1.2 snmpwalk -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10OutputAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.6.2.1.2.1 snmpget -v2c -c public <target> ZXR10-SWITCH-MIB::zxr10OutputAlarmStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.6.2.1.2.1 i <value>
Start monitoring ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SWITCH-MIB::zxr10OutputAlarmStatus OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch series (VLAN/IGMP-snooping/QinQ config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102.6 | zxr10extAlarm | ZXR10-SWITCH-MIB |
| 1.3.6.1.4.1.3902.3.102.6.2 | zxr10OutputAlarmTable | ZXR10-SWITCH-MIB |
| 1.3.6.1.4.1.3902.3.102.6.2.1 | zxr10OutputAlarmEntry | ZXR10-SWITCH-MIB |
| 1.3.6.1.4.1.3902.3.102.6.2.1.2 | zxr10OutputAlarmStatus | ZXR10-SWITCH-MIB |