ZTE-AN-UAPS-MIB :: zxAnUapsSwapReason

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-UAPS-MIB › zxAnUapsSwapReason

zxAnUapsSwapReason

Module: ZTE-AN-UAPS-MIB

OID (symbolic): ZTE-AN-UAPS-MIB::zxAnUapsSwapReason

OID (numeric): 1.3.6.1.4.1.3902.1082.40.80.2.2.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: It indicates the reason of swap. failback(1): Primary port is recovery. failoverByPhyLinkDown(2): Primary port is in fault of physical layer. failoverByIpLinkDown(3): Primary port is in fault of IP layer. forceSwap(4): Force swap. swapByPhyLinkUp(5): In upPortNum mode, swap may be caused by physical link up. swapByPortAdded(6): Swap caused by adding new port. swapByPortDeleted(7): Swap caused by deleting port. swapBySwapModeChanged(8): Swap caused by changing swap mode. noSwap(255): No swap.

What is zxAnUapsSwapReason?

Reports why the most recent primary/secondary swap occurred: recovery/failback, physical link down, IP link down, a forced swap, physical link up (in upPortNum mode), a port being added/deleted, a swap-mode change, or no swap. Read this after an unexpected failover to understand exactly what triggered it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.80.2.2.1.15
snmpwalk -v2c -c public <target> ZTE-AN-UAPS-MIB::zxAnUapsSwapReason

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.40.80.2.2.1.15.1
snmpget -v2c -c public <target> ZTE-AN-UAPS-MIB::zxAnUapsSwapReason.1

Start monitoring ZTE access node (DSLAM/OLT broadband access platform) (unified subscriber-authentication policy config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-UAPS-MIB::zxAnUapsSwapReason OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access platform) (unified subscriber-authentication policy config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.40zxAnBridgeZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.40.80zxAnUapsMibZTE-AN-UAPS-MIB
1.3.6.1.4.1.3902.1082.40.80.2zxAnUapsObjectsZTE-AN-UAPS-MIB
1.3.6.1.4.1.3902.1082.40.80.2.2zxAnUapsGroupTableZTE-AN-UAPS-MIB
1.3.6.1.4.1.3902.1082.40.80.2.2.1zxAnUapsGroupEntryZTE-AN-UAPS-MIB
1.3.6.1.4.1.3902.1082.40.80.2.2.1.15zxAnUapsSwapReasonZTE-AN-UAPS-MIB