All MIBs › ZTE-AN-SECURITY-INTERFACE-MIB › zxAnSecInterfaceCapabilities
zxAnSecInterfaceCapabilities
Module: ZTE-AN-SECURITY-INTERFACE-MIB
OID (symbolic): ZTE-AN-SECURITY-INTERFACE-MIB::zxAnSecInterfaceCapabilities
OID (numeric): 1.3.6.1.4.1.3902.1082.70.10.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The security interface capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment.
bit 0: value 1 means supporting zxAnSecVlanRangeRateLmtTable and zxAnSecVlanRateLimitTable was deprecated.
bit 1: value 1 means supporting the valid range of zxAnSecIfMaxLearnedMacs is from 0 to 1048576 or 2147483647, otherwise the valid range is from 0 to 16383 or 65535.
NOTE: No recommended to display it in NMS.
What is zxAnSecInterfaceCapabilities?
A bitmask reporting which optional security features this device supports: bit 0 indicates support for the newer VLAN range rate-limit table (with the older VLAN rate-limit table deprecated), and bit 1 indicates the MAC-learning-limit range extends up to 1,048,576 rather than the older 16,383/65,535 ceiling; management software reads this to know which value ranges and tables to use, though the MIB itself advises not surfacing it directly in an NMS UI.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.10.1.1 snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-INTERFACE-MIB::zxAnSecInterfaceCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.10.1.1.1 snmpget -v2c -c public <target> ZTE-AN-SECURITY-INTERFACE-MIB::zxAnSecInterfaceCapabilities.1
Start monitoring ZTE access node equipment (DSLAM/OLT) (per-port isolation/trust-designation config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-INTERFACE-MIB::zxAnSecInterfaceCapabilities OID value, configure state conditions and alerts, and monitor any ZTE access node equipment (DSLAM/OLT) (per-port isolation/trust-designation config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.10 | zxAnSecurityInterfaceMib | ZTE-AN-SECURITY-INTERFACE-MIB |
| 1.3.6.1.4.1.3902.1082.70.10.1 | zxAnSecInterfaceGlobalObjects | ZTE-AN-SECURITY-INTERFACE-MIB |
| 1.3.6.1.4.1.3902.1082.70.10.1.1 | zxAnSecInterfaceCapabilities | ZTE-AN-SECURITY-INTERFACE-MIB |