All MIBs › ZTE-AN-SECURITY-ANTIATTACK-MIB › zxAnSecAntiAttackRateLimitEnable
zxAnSecAntiAttackRateLimitEnable
Module: ZTE-AN-SECURITY-ANTIATTACK-MIB
OID (symbolic): ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackRateLimitEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.70.28.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disable anti-attack rate limit. Only supports C6XX, not supports C3XX.
What is zxAnSecAntiAttackRateLimitEnable?
This value enables or disables anti-attack rate limiting, supported only on the C6XX platform and not on C3XX. Admins enable it on supported hardware to actively rate-limit traffic from suspected attacking sources rather than only detecting and blacklisting them. Enabling it on a C6XX device would add active traffic rate limiting as part of the anti-attack response.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.28.1.7 snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackRateLimitEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.28.1.7.1 snmpget -v2c -c public <target> ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackRateLimitEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.28.1.7.1 i <value>
Start monitoring ZTE access node (AN) equipment (control-plane anti-flood enable/threshold/whitelist status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackRateLimitEnable OID value, configure state conditions and alerts, and monitor any ZTE access node (AN) equipment (control-plane anti-flood enable/threshold/whitelist status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.28 | zxAnSecurityAntiAttackMib | ZTE-AN-SECURITY-ANTIATTACK-MIB |
| 1.3.6.1.4.1.3902.1082.70.28.1 | zxAnSecAntiAttackGlobalObjects | ZTE-AN-SECURITY-ANTIATTACK-MIB |
| 1.3.6.1.4.1.3902.1082.70.28.1.7 | zxAnSecAntiAttackRateLimitEnable | ZTE-AN-SECURITY-ANTIATTACK-MIB |