ZTE-AN-SECURITY-ANTIATTACK-MIB :: zxAnSecAntiAttackMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-SECURITY-ANTIATTACK-MIB › zxAnSecAntiAttackMode

zxAnSecAntiAttackMode

Module: ZTE-AN-SECURITY-ANTIATTACK-MIB

OID (symbolic): ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackMode

OID (numeric): 1.3.6.1.4.1.3902.1082.70.28.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Mode of anti-attack. vlanAndSrcMac(1) - system will identify attack based on VLAN and source MAC address. srcIp(2) - system will identify attack based on source IP address.

What is zxAnSecAntiAttackMode?

This value selects how the anti-attack feature identifies an attacking source: vlanAndSrcMac(1) identifies attacks by VLAN plus source MAC address, or srcIp(2) identifies attacks by source IP address. Admins choose the mode matching their network's addressing visibility, such as using srcIp in a routed access network or vlanAndSrcMac in a bridged one. Setting it to srcIp(2) would make the device blacklist offending source IP addresses rather than MAC/VLAN combinations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.28.1.3
snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.28.1.3.1
snmpget -v2c -c public <target> ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.28.1.3.1 i <value>

Start monitoring ZTE access node (AN) equipment (control-plane anti-flood enable/threshold/whitelist status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-ANTIATTACK-MIB::zxAnSecAntiAttackMode OID value, configure state conditions and alerts, and monitor any ZTE access node (AN) equipment (control-plane anti-flood enable/threshold/whitelist status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.70zxAnServiceSecurityZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.70.28zxAnSecurityAntiAttackMibZTE-AN-SECURITY-ANTIATTACK-MIB
1.3.6.1.4.1.3902.1082.70.28.1zxAnSecAntiAttackGlobalObjectsZTE-AN-SECURITY-ANTIATTACK-MIB
1.3.6.1.4.1.3902.1082.70.28.1.3zxAnSecAntiAttackModeZTE-AN-SECURITY-ANTIATTACK-MIB