ZTE-AN-REMOTE-UNIT-SW-MIB :: zxAnRuSwManualUpdateAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsZTE-AN-REMOTE-UNIT-SW-MIBzxAnRuSwManualUpdateAction

zxAnRuSwManualUpdateAction

Module: ZTE-AN-REMOTE-UNIT-SW-MIB

OID (symbolic): ZTE-AN-REMOTE-UNIT-SW-MIB::zxAnRuSwManualUpdateAction

OID (numeric): 1.3.6.1.4.1.3902.1082.20.40.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The software version update action. Actions are defined as follows: 1 update software version 2 update software version and reboot the CPE 3 activate the software version 4 commit software version 5 abort software version 6 update software version first, then activate and commit software version when ONU re-onlines 7 update and commit software version

What is zxAnRuSwManualUpdateAction?

This OID triggers the manual software-update action for the remote units listed in zxAnRuSwManualUpdateList: update(1) just loads the new version, updateAndReboot(2) also reboots the CPE, activate(3)/commit(4) finalize a previously loaded version, abort(5) cancels it, updateReonline(6) updates then activates/commits only after the ONU comes back online, and updateAndCommit(7) does both steps at once. An admin sets this to updateAndReboot(2), for example, to push and immediately apply a new firmware image to the listed ONUs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.40.1.1.6
snmpwalk -v2c -c public <target> ZTE-AN-REMOTE-UNIT-SW-MIB::zxAnRuSwManualUpdateAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.40.1.1.6.1
snmpget -v2c -c public <target> ZTE-AN-REMOTE-UNIT-SW-MIB::zxAnRuSwManualUpdateAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.20.40.1.1.6.1 i <value>

Start monitoring ZTE access nodes/OLTs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-REMOTE-UNIT-SW-MIB::zxAnRuSwManualUpdateAction OID value, configure state conditions and alerts, and monitor any ZTE access nodes/OLTs from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteUAS-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.20zxAnSystemZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.20.40zxAnRemoteUnitSoftwareMibZTE-AN-REMOTE-UNIT-SW-MIB
1.3.6.1.4.1.3902.1082.20.40.1zxAnRuSwGlobalObjectsZTE-AN-REMOTE-UNIT-SW-MIB
1.3.6.1.4.1.3902.1082.20.40.1.1zxAnRuSwManualUpdateObjectsZTE-AN-REMOTE-UNIT-SW-MIB
1.3.6.1.4.1.3902.1082.20.40.1.1.6zxAnRuSwManualUpdateActionZTE-AN-REMOTE-UNIT-SW-MIB