All MIBs › ZTE-AN-OTDR-MIB › zxAnOtdrIfUsageStatus
zxAnOtdrIfUsageStatus
Module: ZTE-AN-OTDR-MIB
OID (symbolic): ZTE-AN-OTDR-MIB::zxAnOtdrIfUsageStatus
OID (numeric): 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The usage status of OTDR interface. used(1): Health test has been run successfully. unused(2): No test parameter profile is bound to the port and the health test never runs. preconfigured(3): Test parameter profile is bound to the port. reserved(4): The port is reserved by administrator. Test parameter profile cannot be bound to a reserved port and the health test cannot run on it.
What is zxAnOtdrIfUsageStatus?
Reports the OTDR interface's usage state: used(1) once a health test has run successfully, unused(2) if no test-parameter profile is bound and health test has never run, preconfigured(3) once a profile is bound but not yet tested, or reserved(4) if an admin has blocked it from testing and binding. Use this to find ports that still need initial health-test setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19 snmpwalk -v2c -c public <target> ZTE-AN-OTDR-MIB::zxAnOtdrIfUsageStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19.1 snmpget -v2c -c public <target> ZTE-AN-OTDR-MIB::zxAnOtdrIfUsageStatus.1
Start monitoring ZTE Access Node (PON/fiber interfaces with integrated OTDR) (fiber-fault-distance/loss test-result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-OTDR-MIB::zxAnOtdrIfUsageStatus OID value, configure state conditions and alerts, and monitor any ZTE Access Node (PON/fiber interfaces with integrated OTDR) (fiber-fault-distance/loss test-result status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1083 | zxAnOfd | ZTE-AN-OFD-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1083.5 | zxAnOtdrMib | ZTE-AN-OTDR-MIB |
| 1.3.6.1.4.1.3902.1083.5.2 | zxAnOtdrObjects | ZTE-AN-OTDR-MIB |
| 1.3.6.1.4.1.3902.1083.5.2.1 | zxAnOtdrIfObjects | ZTE-AN-OTDR-MIB |
| 1.3.6.1.4.1.3902.1083.5.2.1.3 | zxAnOtdrIfTable | ZTE-AN-OTDR-MIB |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1 | zxAnOtdrIfEntry | ZTE-AN-OTDR-MIB |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19 | zxAnOtdrIfUsageStatus | ZTE-AN-OTDR-MIB |