All MIBs › ZTE-AN-MAC-ANTI-SPOOFING-MIB › zxAnMasMacMovePermitVlanList
zxAnMasMacMovePermitVlanList
Module: ZTE-AN-MAC-ANTI-SPOOFING-MIB
OID (symbolic): ZTE-AN-MAC-ANTI-SPOOFING-MIB::zxAnMasMacMovePermitVlanList
OID (numeric): 1.3.6.1.4.1.3902.1082.70.20.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: MAC-anti-spoofing(Mas) VLAN ID list for permitting MAC address moving. | Byte 0 | Byte 1 | Byte 2 | Byte 3 ... Byte 512 | +-----------+-----------+-----------+-----------...--------------+ | BitMap | BitMap | BitMap | BitMap ... BitMap | | VLAN 0-7 | VLAN8-15 | VLAN16-23 | VLAN24-31 ...VLAN4088-4095 | +-----------+-----------+-----------+-----------...--------------+ If one bit is set to '1', the corresponding VLAN ID is configured to permit MAC address moving. VLAN 0 and VLAN 4095 are invalid, so bit 0 and bit 4095 must be always '0'. This object is effective only when zxAnMasEnable is enabled.
What is zxAnMasMacMovePermitVlanList?
This object is a 512-byte bitmap where each bit represents a VLAN ID (0-4095) and a set bit means MAC address moving is permitted on that VLAN, with VLAN 0 and 4095 always invalid and forced to 0; the object only takes effect when zxAnMasEnable is enabled. Admins configure this bitmap to whitelist specific VLANs where MAC movement should be allowed even under anti-spoofing enforcement. For example, an admin permitting MAC moves only on VLAN 100 would set just the bit corresponding to VLAN 100 in this bitmap, leaving all other VLAN bits at 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.20.1.4 snmpwalk -v2c -c public <target> ZTE-AN-MAC-ANTI-SPOOFING-MIB::zxAnMasMacMovePermitVlanList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.20.1.4.1 snmpget -v2c -c public <target> ZTE-AN-MAC-ANTI-SPOOFING-MIB::zxAnMasMacMovePermitVlanList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.20.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zxAnMasMacMovePermitVlanList.1
Start monitoring ZTE Access Node (DSLAM/GPON broadband access equipment) (MAC anti-spoofing enforcement/conformance status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-MAC-ANTI-SPOOFING-MIB::zxAnMasMacMovePermitVlanList OID value, configure state conditions and alerts, and monitor any ZTE Access Node (DSLAM/GPON broadband access equipment) (MAC anti-spoofing enforcement/conformance status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.20 | zxAnMasMib | ZTE-AN-MAC-ANTI-SPOOFING-MIB |
| 1.3.6.1.4.1.3902.1082.70.20.1 | zxAnMasGlobalObjects | ZTE-AN-MAC-ANTI-SPOOFING-MIB |
| 1.3.6.1.4.1.3902.1082.70.20.1.4 | zxAnMasMacMovePermitVlanList | ZTE-AN-MAC-ANTI-SPOOFING-MIB |