All MIBs › ZTE-AN-ACL-MIB › zxAnAclCapabilities
zxAnAclCapabilities
Module: ZTE-AN-ACL-MIB
OID (symbolic): ZTE-AN-ACL-MIB::zxAnAclCapabilities
OID (numeric): 1.3.6.1.4.1.3902.1082.70.15.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The ACL capabilities for this equipment. The bit value 1 means the function represented by this bit is supported. tagTpid(0): value 1 means supporting zxAnAclHybridRuleStagTpid, zxAnAclHybridRuleCtagTpid. itag(1): value 1 means supporting zxAnAclHybridRuleItagTpid, zxAnAclHybridRuleIsid. unifiedTypeAcl(2): value 1 means just supporting one type of ACL, all ACLs in zxAnAclTable are the same type, zxAnAclNumber range is 1~699, and only supporting zxAnAclIpv6HybridRuleTable. aclNotSupportName(3): value 1 means not supporting zxAnAclName. aclRuleIpGroup(4): value 1 means supporting zxAnAclIpv6HybridSrcIpGrpName and zxAnAclIpv6HybridDestIpGrpName. icmpType(5),value 1 means supporting zxAnAclIpv6HybridStartIcmpType, zxAnAclIpv6HybridEndIcmpType and zxAnAclIpv6HybridIcmpTypeOper.
What is zxAnAclCapabilities?
This read-only BITS value reports which optional ACL features this particular ZTE access node firmware build supports (e.g. tagTpid, itag, unifiedTypeAcl, icmpType), so management software can check a bit before trying to set a feature-specific object like zxAnAclHybridRuleStagTpid, avoiding errors on hardware that doesn't support it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.15.1.1 snmpwalk -v2c -c public <target> ZTE-AN-ACL-MIB::zxAnAclCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.15.1.1.1 snmpget -v2c -c public <target> ZTE-AN-ACL-MIB::zxAnAclCapabilities.1
Start monitoring ZTE access node (broadband/PON access) platforms (ACL rule-definition/traffic-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-ACL-MIB::zxAnAclCapabilities OID value, configure state conditions and alerts, and monitor any ZTE access node (broadband/PON access) platforms (ACL rule-definition/traffic-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.15 | zxAnAclMib | ZTE-AN-ACL-MIB |
| 1.3.6.1.4.1.3902.1082.70.15.1 | zxAnAclGlobalObjects | ZTE-AN-ACL-MIB |
| 1.3.6.1.4.1.3902.1082.70.15.1.1 | zxAnAclCapabilities | ZTE-AN-ACL-MIB |