All MIBs › ZHONE-Wan-MIB › zhoneLineType
zhoneLineType
Module: ZHONE-Wan-MIB
OID (symbolic): ZHONE-Wan-MIB::zhoneLineType
OID (numeric): 1.3.6.1.4.1.5504.5.2.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe:
TITLE: SPECIFICATION: other(1) (not supported in this release) esf(2) Extended SuperFrame DS1 (T1.107) d4(3) AT&T D4 format DS1 (T1.107) slc96(4) (not supported in this release) e1(5) ITU-T Recommendation G.704 (not supported in this release) e1Crc(6) ITU-T Recommendation G.704 (not supported in this release) e1Mf(7) G.704 multiframing enabled e1CrcMf(8) G.704 multiframing enabled and crc enabled e1Unframed(9) E1 with no framing ds1Unframed(10) Ds1 with no framing
For clarification, the capacity for each E1 type is as listed below: e1 or e1Crc - e1, with framing, no signalling = 31 x 64k = 1984k e1Mf or e1CrcMf - e1, with framing, signalling = 30 x 64k = 1920k
For further information See ITU-T Recomm G.704
Default is set to esf for T1 platforms and e1CrcMf for E1 platforms. BAN E1: esf,d4 T1:e1,e1mf,e1crcmf
What is zhoneLineType?
Selects the DS1/E1 framing format for this line -- such as ESF or D4 for T1, or the various G.704 framed/unframed/multiframe/CRC options for E1 -- which determines both the usable bandwidth and how the interface's error counters are interpreted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.2.2.1.4 snmpwalk -v2c -c public <target> ZHONE-Wan-MIB::zhoneLineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.2.2.1.4.1 snmpget -v2c -c public <target> ZHONE-Wan-MIB::zhoneLineType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.2.2.1.4.1 i <value>
Start monitoring Zhone broadband CPE / access gateways, ATM/Ethernet/T1-E1 WAN (CSU/DSX line-mode config, WAN-link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-Wan-MIB::zhoneLineType OID value, configure state conditions and alerts, and monitor any Zhone broadband CPE / access gateways, ATM/Ethernet/T1-E1 WAN (CSU/DSX line-mode config, WAN-link status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| 1.3.6.1.4.1.5504.5.2 | zhoneDsx | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.2.2 | zhoneDs1Table | ZHONE-Wan-MIB |
| 1.3.6.1.4.1.5504.5.2.2.1 | zhoneDs1Entry | ZHONE-Wan-MIB |
| 1.3.6.1.4.1.5504.5.2.2.1.4 | zhoneLineType | ZHONE-Wan-MIB |