ZHONE-Wan-MIB :: zhoneBertStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-Wan-MIB › zhoneBertStatus

zhoneBertStatus

Module: ZHONE-Wan-MIB

OID (symbolic): ZHONE-Wan-MIB::zhoneBertStatus

OID (numeric): 1.3.6.1.4.1.5504.5.2.14.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The overall BERT operational status. This field will indicate the operation status for the interface indexed by zhoneBertInterfaceIndex.

inProgress (1) - if the test is currently running.

abortInProgress (2) - if a request to stop the test is still in progress.

complete (3) - if the test has been run at least once since system reset and has completed.

noResults (4) - if the test results are empty, such as after a system reset.

aborted (5) - if the test was aborted by the user before it could complete.

unsupported (6) - if the device does not support BERT.

portNotAdminTest (7) - if port not in admin TEST.

failed (8) - if BERT failed to complete.

What is zhoneBertStatus?

Reports the overall state of the most recent or currently running BERT test on the selected DS1 -- in progress, aborting, complete, no results yet (e.g. since reset), aborted by the user, unsupported on this hardware, blocked because the port isn't in admin test mode, or outright failed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.2.14.1.1
snmpwalk -v2c -c public <target> ZHONE-Wan-MIB::zhoneBertStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.2.14.1.1.1
snmpget -v2c -c public <target> ZHONE-Wan-MIB::zhoneBertStatus.1

Start monitoring Zhone broadband CPE / access gateways, ATM/Ethernet/T1-E1 WAN (CSU/DSX line-mode config, WAN-link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-Wan-MIB::zhoneBertStatus OID value, configure state conditions and alerts, and monitor any Zhone broadband CPE / access gateways, ATM/Ethernet/T1-E1 WAN (CSU/DSX line-mode config, WAN-link status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.5zhonePhysicalZhone
1.3.6.1.4.1.5504.5.2zhoneDsxZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.5.2.14zhoneDs1BertResultsTableZHONE-Wan-MIB
1.3.6.1.4.1.5504.5.2.14.1zhoneDs1BertResultsEntryZHONE-Wan-MIB
1.3.6.1.4.1.5504.5.2.14.1.1zhoneBertStatusZHONE-Wan-MIB