ZHONE-SYSTEM-MIB :: zhoneSystemConfigurationReservedVlanIdCount

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › ZHONE-SYSTEM-MIB › zhoneSystemConfigurationReservedVlanIdCount

zhoneSystemConfigurationReservedVlanIdCount

Module: ZHONE-SYSTEM-MIB

OID (symbolic): ZHONE-SYSTEM-MIB::zhoneSystemConfigurationReservedVlanIdCount

OID (numeric): 1.3.6.1.4.1.5504.3.1.5.23

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Number of reserved VLAN IDs in the reserved VLAN ID block.

A zero value disables these reserved VLANs and operation reverts to normal VLAN ID reservation.

The reserved VLAN ID block starts with the reservedVlanIdStart and ends with reservedVlanIdStart + reservedVlanIdCount;

No bridge, host, or IP can use a VLAN ID in the reserved VLANs.

For GPON OLTs, the number of GEM Ports per OLT cannot exceed this number.

What is zhoneSystemConfigurationReservedVlanIdCount?

Sets how many VLAN IDs, starting at zhoneSystemConfigurationReservedVlanIdStart, are reserved and unavailable to any bridge, host, or IP interface. A value of 0 disables the reservation entirely, and on GPON OLTs this count also caps the number of GEM ports allowed per OLT. The default is 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.5.23
snmpwalk -v2c -c public <target> ZHONE-SYSTEM-MIB::zhoneSystemConfigurationReservedVlanIdCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.5.23.1
snmpget -v2c -c public <target> ZHONE-SYSTEM-MIB::zhoneSystemConfigurationReservedVlanIdCount.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.3.1.5.23.1 i <value>

Start monitoring Zhone Technologies broadband/access CPE devices (base device-identity/software-version/reboot-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-SYSTEM-MIB::zhoneSystemConfigurationReservedVlanIdCount OID value, configure state conditions and alerts, and monitor any Zhone Technologies broadband/access CPE devices (base device-identity/software-version/reboot-control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.3zhoneGenericZhone
1.3.6.1.4.1.5504.3.1zhoneSystemZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.3.1.5zhoneSystemConfigurationZHONE-SYSTEM-MIB
1.3.6.1.4.1.5504.3.1.5.23zhoneSystemConfigurationReservedVlanIdCountZHONE-SYSTEM-MIB