ZHONE-SYSTEM-MIB :: zhoneAdslPotsMaxActiveBypassRelays

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › ZHONE-SYSTEM-MIB › zhoneAdslPotsMaxActiveBypassRelays

zhoneAdslPotsMaxActiveBypassRelays

Module: ZHONE-SYSTEM-MIB

OID (symbolic): ZHONE-SYSTEM-MIB::zhoneAdslPotsMaxActiveBypassRelays

OID (numeric): 1.3.6.1.4.1.5504.3.1.13.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Maximum number of Adsl Pots LPF Bypass Relays that can be active on any one card at any given time. This number is determined by the device and is calculated based upon power consumption of the relays.

For example, if this value is set to 8, each Adsl Pots Splitter w/Bypass Relay card can have 8 relays set to closed at any given time.

This object is only valid for Adsl Pots Splitter cards containing the Pots LBF Relays.

What is zhoneAdslPotsMaxActiveBypassRelays?

Reports the maximum number of ADSL/POTS LPF bypass relays that can be active simultaneously on a single card, a limit derived from the relays' power consumption. For example, a value of 8 means up to 8 relays on that card type can be closed at once; this only applies to ADSL POTS Splitter cards with bypass relays.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.13.1
snmpwalk -v2c -c public <target> ZHONE-SYSTEM-MIB::zhoneAdslPotsMaxActiveBypassRelays

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.13.1.1
snmpget -v2c -c public <target> ZHONE-SYSTEM-MIB::zhoneAdslPotsMaxActiveBypassRelays.1

Start monitoring Zhone Technologies broadband/access CPE devices (base device-identity/software-version/reboot-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-SYSTEM-MIB::zhoneAdslPotsMaxActiveBypassRelays OID value, configure state conditions and alerts, and monitor any Zhone Technologies broadband/access CPE devices (base device-identity/software-version/reboot-control status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.3zhoneGenericZhone
1.3.6.1.4.1.5504.3.1zhoneSystemZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.3.1.13zhoneAdslPotsBypassRelayZHONE-SYSTEM-MIB
1.3.6.1.4.1.5504.3.1.13.1zhoneAdslPotsMaxActiveBypassRelaysZHONE-SYSTEM-MIB