All MIBs › ZHONE-MAU-MIB › zhoneMauAggregationMode
zhoneMauAggregationMode
Module: ZHONE-MAU-MIB
OID (symbolic): ZHONE-MAU-MIB::zhoneMauAggregationMode
OID (numeric): 1.3.6.1.4.1.5504.5.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: On: The link aggregation is forced to be formed without any LACP negotiation .In other words, the switch will neither send the LACP packet nor process any incoming LACP packet. This is similar to the on state for PAgP.
Off: The link aggregation will not be formed. We do not send or understand the LACP packet. This is similar to the off state for PAgP.
Passive: The switch does not initiate the channel, but does understand incoming LACP packets. The peer (in active state) initiates negotiation (by sending out an LACP packet) which we receive and reply to, eventually forming the aggregation channel with the peer. This is similar to the auto mode in PAgP.
Active: We are willing to form an aggregate link, and initiate the negotiation. The link aggregate will be formed if the other end is running in LACP active or passive mode. This is similar to the desirable mode of PAgP.
What is zhoneMauAggregationMode?
Sets this port's LACP link-aggregation behavior: on (forms the aggregate with no LACP negotiation at all), off (never aggregates), passive (waits for the peer to initiate LACP), or active (initiates LACP negotiation itself); defaults to on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.1.1.1.14 snmpwalk -v2c -c public <target> ZHONE-MAU-MIB::zhoneMauAggregationMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.1.1.1.14.1 snmpget -v2c -c public <target> ZHONE-MAU-MIB::zhoneMauAggregationMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.1.1.1.14.1 i <value>
Start monitoring Zhone Technologies Ethernet-equipped access/aggregation device (autonegotiation/link-speed/duplex-mode status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-MAU-MIB::zhoneMauAggregationMode OID value, configure state conditions and alerts, and monitor any Zhone Technologies Ethernet-equipped access/aggregation device (autonegotiation/link-speed/duplex-mode status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| 1.3.6.1.4.1.5504.5.1 | zhoneEnet | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.1.1 | zhoneIfMauTable | ZHONE-MAU-MIB |
| 1.3.6.1.4.1.5504.5.1.1.1 | zhoneIfMauEntry | ZHONE-MAU-MIB |
| 1.3.6.1.4.1.5504.5.1.1.1.14 | zhoneMauAggregationMode | ZHONE-MAU-MIB |