All MIBs › ZHONE-COM-PPP-MIB › pppIfVpi
pppIfVpi
Module: ZHONE-COM-PPP-MIB
OID (symbolic): ZHONE-COM-PPP-MIB::pppIfVpi
OID (numeric): 1.3.6.1.4.1.5504.4.5.1.1.2
Node type: OBJECT-TYPE
Type: AtmVpIdentifier
Access: read-create
Description: If this IP interface is on an ATM VC, the ATM VPI is specified here. If the IP interface is not an ATM VC, this field is ignored. The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxActiveVpiBits defined in ATM-MIB.
What is pppIfVpi?
The ATM Virtual Path Identifier (0-255 for UNI, up to 4095 for NNI) this PPP-over-ATM interface uses, ignored if the interface isn't on an ATM VC; an admin sets this to match the VPI provisioned by the carrier for this DSL/ATM circuit.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.4 | zhoneCommunicationProtocols | Zhone |
| 1.3.6.1.4.1.5504.4.5 | zhonePpp | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.4.5.1 | pppInterfaceTable | ZHONE-COM-PPP-MIB |
| 1.3.6.1.4.1.5504.4.5.1.1 | pppInterfaceEntry | ZHONE-COM-PPP-MIB |
| 1.3.6.1.4.1.5504.4.5.1.1.2 | pppIfVpi | ZHONE-COM-PPP-MIB |