ZHONE-COM-IP-REC-MIB :: ipIfVpi

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsZHONE-COM-IP-REC-MIBipIfVpi

ipIfVpi

Module: ZHONE-COM-IP-REC-MIB

OID (symbolic): ZHONE-COM-IP-REC-MIB::ipIfVpi

OID (numeric): 1.3.6.1.4.1.5504.4.1.9.2.1.2

Node type: OBJECT-TYPE

Type: AtmVpIdentifier

Access: read-create

Description: If this IP interface is on an ATM VC, the ATM VPI is specified here. If the IP interface is not an ATM VC, this field is ignored. The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB.

What is ipIfVpi?

Sets the ATM Virtual Path Identifier for this IP interface when it rides on an ATM VC (ignored otherwise); VPI 0 is reserved for VCL-only use, with the valid range extending up to 255 on UNIs or 4095 on NNIs, capped by the ATM-MIB's atmInterfaceMaxVpiBits.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504zhoneZhone
1.3.6.1.4.1.5504.4zhoneCommunicationProtocolsZhone
1.3.6.1.4.1.5504.4.1zhoneIpZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.4.1.9ipRecordObjectsZHONE-COM-IP-REC-MIB
1.3.6.1.4.1.5504.4.1.9.2ipInterfaceTableZHONE-COM-IP-REC-MIB
1.3.6.1.4.1.5504.4.1.9.2.1ipInterfaceEntryZHONE-COM-IP-REC-MIB
1.3.6.1.4.1.5504.4.1.9.2.1.2ipIfVpiZHONE-COM-IP-REC-MIB