All MIBs › ZHONE-CARD-RESOURCES-MIB › zrgBatteryRelayStatus
zrgBatteryRelayStatus
Module: ZHONE-CARD-RESOURCES-MIB
OID (symbolic): ZHONE-CARD-RESOURCES-MIB::zrgBatteryRelayStatus
OID (numeric): 1.3.6.1.4.1.5504.3.3.11.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Description.
The object describes the state of the ZRG board power supply. The power may have one or two states from the following states:
normalMode(0) indicates that the load is receiving power from commercial power
batteryON(1) indicates that the load is receiving power from battery.
batteryLOW(2) indicates that the battery has been reduced to the point that roughly 20% of the available runtime is available.
batteryBAD(3) indicates that the battery has failed it's periodic test. The battery should be replaced as system availability has been compromised.
batteryGone(4) indicates that the battery is disconnected. Load will not be supported if the commercial power fails.
noUPS(5) indicates that the UPS unit is disconnected. Load will not be supported if the commercial power fails.
What is zrgBatteryRelayStatus?
A bitmap reporting the ZRG board's power state - normal commercial power, running on battery, battery low with about 20% runtime remaining, battery failed its self-test and needs replacing, battery disconnected, or the UPS itself disconnected - the last three conditions all meaning the load has no backup protection if commercial power fails, which an admin should treat as urgent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.3.3.11.1 snmpwalk -v2c -c public <target> ZHONE-CARD-RESOURCES-MIB::zrgBatteryRelayStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.3.3.11.1.1 snmpget -v2c -c public <target> ZHONE-CARD-RESOURCES-MIB::zrgBatteryRelayStatus.1
Start monitoring Zhone Technologies broadband access line card (per-CPU memory/CPU-load/channel-capacity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-CARD-RESOURCES-MIB::zrgBatteryRelayStatus OID value, configure state conditions and alerts, and monitor any Zhone Technologies broadband access line card (per-CPU memory/CPU-load/channel-capacity status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.3 | zhoneGeneric | Zhone |
| 1.3.6.1.4.1.5504.3.3 | zhoneCard | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.3.3.11 | zrgResources | ZHONE-CARD-RESOURCES-MIB |
| 1.3.6.1.4.1.5504.3.3.11.1 | zrgBatteryRelayStatus | ZHONE-CARD-RESOURCES-MIB |