All MIBs › XYLO-WAN-MIB › gpPPPIpxNode

gpPPPIpxNode

OID (symbolic): XYLO-WAN-MIB::gpPPPIpxNode

OID (numeric): 1.3.6.1.4.1.15.2.12.2.83

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The IPX node number for an IPX PPP connection using this port. The value of this object is a 12 digit hexadecimal number string representing the IPX node number assigned to this port. Note the string is expected in the form: 12-3a-4-7-89-23.Each part of the address must be a hex value separated by a hyphen. This MIB object corresponds to the NA/admin asynchronous/ta/sync port parameter 'ppp_ipx_node'.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.12.2.83
snmpwalk -v2c -c public <target> XYLO-WAN-MIB::gpPPPIpxNode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.12.2.83.1
snmpget -v2c -c public <target> XYLO-WAN-MIB::gpPPPIpxNode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.12.2.83.1 s <value>

Start monitoring Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-WAN-MIB::gpPPPIpxNode OID value, configure state conditions and alerts, and monitor any Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.15	xylogics	ANNEX-MIB
1.3.6.1.4.1.15.2	annex	ANNEX-MIB
1.3.6.1.4.1.15.2.12	anxpri	XYLO-MIB-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.15.2.12.2	globals	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.12.2.83	gpPPPIpxNode	XYLO-WAN-MIB

XYLO-WAN-MIB :: gpPPPIpxNode

gpPPPIpxNode

Module

This MIB depends on