Description: Select the switch type compatibile with the PRI service provider. default(1) Will select the default switch chosen by the wan manager based on the moduletype. If you set the switchtype to default(1), reboot the box, and do an snmpget on the switchtype, you can determine which switchtype was chosen by the wan manager.

other(2) - For a GET, this value reflects the switch type set through Cli/Admin which does not match with other switches listed here. For a SET the SNMP agent will ignore it and will not change the current switch type set through Cli/Admin.

switch_type description protocol ___________________________________________________________________ sng(3), Singapore E1 ISDN PRI ni2(4), NI-2 (National ISDN 2) T1 ISDN PRI dms(5), DMS-100 (Northern Telecom) T1 ISDN PRI at9(6), 5ESS (AT&T 5ESS) T1 ISDN PRI ets(7), ETSI E1 ISDN PRI au1(8), Australia/AUSTEL E1 PRI PRI ntt(10), Japan NTT PRI ets-ncrc4(11), ETSI E1 ISDN w/o CRC4 PRI ust1(12), US/North American Channelized T1 CAS hkt1(13), Hong Kong Channelized T1 CAS twt1r1(14), Taiwan T1/R1 CAS bbe1r2(15), BlueBook/CCITT E1/R2 CAS at4(16), 4ESS (AT&T 4ESS) T1 ISDN PRI bre1r2(17), Brazil E1/R2 CAS kre1r2-1(18), Korea E1/R2 CAS swe1p7(19) Sweden E1 P7 CAS ine1r2(20), Indonesia E1/R2 CAS cne1r2(21), China E1/R2 CAS nze1r2(22), New Zealand E1/R2 CAS ust1fd(23), Unites States CAS ess-v10(24), nosig(25), SS7, No signaling required SS7 br2e1r2(26), Brazil E1/R2, 1 second wink CAS kre1r2-2(27), Korea E1/R2 CAS ide1r2(28), Indonesia CAS phe1r2(29), Philippines CAS the1r2(30), Thailand CAS mye1r2(31), Malaysia CAS are1r2(32), Argentina CAS mxe1r2(33), Mexico CAS ane1r2(34), St.Martin-Antilles CAS tre1r2(35), Turkey CAS ile1r2(36), Israel CAS moe1r2(37), Macau CAS ine1r2-1(38), India sig1 CAS ine1r2-2(39), India sig2 CAS ine1r2-3(40), India sig3 CAS ine1r2-4(41), India sig4 CAS twt1(42), Taiwan (wink) CAS ust1fc(43), Unites States CAS ust1fdi(44), Unites States CAS ni2_nfas_primary(45), NI-2 (National ISDN 2) T1 ISDN PRI ni2_nfas_backup(46), NI-2 (National ISDN 2) T1 ISDN PRI dms_nfas_primary(47), DMS-100 (Northern Telecom) T1 ISDN PRI dms_nfas_backup(48) DMS-100 (Northern Telecom) T1 ISDN PRI

This parameter is available on all platforms using PRI module and platforms using the WAN module configured for CAS or PRI. You must reset the box for the new switch_type to take effect