All MIBs › XYLO-WAN-MIB › anxt1EngineBypass

anxt1EngineBypass

OID (symbolic): XYLO-WAN-MIB::anxt1EngineBypass

OID (numeric): 1.3.6.1.4.1.15.2.11.2.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: when this object is set to yes the T1 engine is taken out of the network. The Network Interface is then physically coupled to the Drop and Insert Interface, and the T1 engine has no effect on the T1 circuit. bypass is the corresp. na/admin paramter. This object is supported for T1 modules only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.8
snmpwalk -v2c -c public <target> XYLO-WAN-MIB::anxt1EngineBypass

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.8.1
snmpget -v2c -c public <target> XYLO-WAN-MIB::anxt1EngineBypass.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.11.2.1.8.1 i <value>

Start monitoring Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-WAN-MIB::anxt1EngineBypass OID value, configure state conditions and alerts, and monitor any Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.15	xylogics	ANNEX-MIB
1.3.6.1.4.1.15.2	annex	ANNEX-MIB
1.3.6.1.4.1.15.2.11	anxt1	XYLO-MIB-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.15.2.11.2	anxt1ConfigT1Table	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1	anxt1ConfigT1Entry	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1.8	anxt1EngineBypass	XYLO-WAN-MIB

XYLO-WAN-MIB :: anxt1EngineBypass

anxt1EngineBypass

Module

This MIB depends on