All MIBs › XYLO-WAN-MIB › anxt1CasDigitPower1

anxt1CasDigitPower1

OID (symbolic): XYLO-WAN-MIB::anxt1CasDigitPower1

OID (numeric): 1.3.6.1.4.1.15.2.11.2.1.25

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This parameter allows the power level of the FIRST tone of each digit generated by the WAN module to be adjusted. The default value is 0.

This MIB object corresponds to the na/admin parameter digit_power_1.

This parameter is available on platforms using the WAN module configured for CAS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.25
snmpwalk -v2c -c public <target> XYLO-WAN-MIB::anxt1CasDigitPower1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.25.1
snmpget -v2c -c public <target> XYLO-WAN-MIB::anxt1CasDigitPower1.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.11.2.1.25.1 i <value>

Start monitoring Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-WAN-MIB::anxt1CasDigitPower1 OID value, configure state conditions and alerts, and monitor any Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.15	xylogics	ANNEX-MIB
1.3.6.1.4.1.15.2	annex	ANNEX-MIB
1.3.6.1.4.1.15.2.11	anxt1	XYLO-MIB-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.15.2.11.2	anxt1ConfigT1Table	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1	anxt1ConfigT1Entry	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1.25	anxt1CasDigitPower1	XYLO-WAN-MIB

XYLO-WAN-MIB :: anxt1CasDigitPower1

anxt1CasDigitPower1

Module

This MIB depends on