All MIBs › XYLO-WAN-MIB › anxt1CasAniEnable

anxt1CasAniEnable

OID (symbolic): XYLO-WAN-MIB::anxt1CasAniEnable

OID (numeric): 1.3.6.1.4.1.15.2.11.2.1.34

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This parameter allows the user to configure whether or not to allow CAS ANI digits, (per provisioning). The default is disable.

This MIB object corresponds to the na/admin WAN parameter 'ani'.

This parameter is available on platforms using the WAN module configured for CAS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.34
snmpwalk -v2c -c public <target> XYLO-WAN-MIB::anxt1CasAniEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.11.2.1.34.1
snmpget -v2c -c public <target> XYLO-WAN-MIB::anxt1CasAniEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.11.2.1.34.1 i <value>

Start monitoring Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-WAN-MIB::anxt1CasAniEnable OID value, configure state conditions and alerts, and monitor any Xylogics (Bay Networks) Annex remote-access servers (T1/PRI line framing/signaling config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.15	xylogics	ANNEX-MIB
1.3.6.1.4.1.15.2	annex	ANNEX-MIB
1.3.6.1.4.1.15.2.11	anxt1	XYLO-MIB-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.15.2.11.2	anxt1ConfigT1Table	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1	anxt1ConfigT1Entry	XYLO-WAN-MIB
1.3.6.1.4.1.15.2.11.2.1.34	anxt1CasAniEnable	XYLO-WAN-MIB

XYLO-WAN-MIB :: anxt1CasAniEnable

anxt1CasAniEnable

Module

This MIB depends on