XYLAN-NTP-MIB :: xylanNtpAccessRestrictedRestrictions

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › XYLAN-NTP-MIB › xylanNtpAccessRestrictedRestrictions

xylanNtpAccessRestrictedRestrictions

Module: XYLAN-NTP-MIB

OID (symbolic): XYLAN-NTP-MIB::xylanNtpAccessRestrictedRestrictions

OID (numeric): 1.3.6.1.4.1.800.2.27.5.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A mask indicating the restrictions to apply to the entry. 0x0001 - ignore, Ignore all packets from hosts. 0x0002 - noquery, Ignore all NTP information queries and configuration requests from the source. 0x0004 - nomodify, Ignore all NTP information queries and configuration requests that attempt to modify the state of the server. 0x0008 - notrap, Decline to provide control message trap service to matching hosts. 0x0010 - lowpriotrap, Declare traps set by matching hosts to be low priority. 0x0020 - noserve, Ignore NTP packets other than information queries and config-uration requests. 0x0040 - nopeer, Provide stateless time service to polling hosts, but do not allocate peer memory resources to these hosts even if they otherwise might be considered useful as future synchronization partners. 0x0080 - notrust, Treat these hosts normally in other respects, but never use them as synchronization sources. 0x0100 - limited, These hosts are subject to a limitation of the number of clients from the same net.

What is xylanNtpAccessRestrictedRestrictions?

Sets a bitmask of restrictions applied to hosts matching this address/mask, e.g. 0x0001 ignore all packets, 0x0004 nomodify to block configuration changes, or 0x0080 notrust to never use the host as a time source, among other flags defined in the source MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.27.5.2.1.3
snmpwalk -v2c -c public <target> XYLAN-NTP-MIB::xylanNtpAccessRestrictedRestrictions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.27.5.2.1.3.1
snmpget -v2c -c public <target> XYLAN-NTP-MIB::xylanNtpAccessRestrictedRestrictions.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.27.5.2.1.3.1 i <value>

Start monitoring Xylan OmniSwitch ATM/LAN switch (NTP peer/association enabled-status config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-NTP-MIB::xylanNtpAccessRestrictedRestrictions OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch ATM/LAN switch (NTP peer/association enabled-status config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.800xylanXYLAN-BASE-MIB
1.3.6.1.4.1.800.2xylanArchXYLAN-BASE-MIB
1.3.6.1.4.1.800.2.27xylanNtpArchXYLAN-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.800.2.27.5xylanNtpAccessXYLAN-NTP-MIB
1.3.6.1.4.1.800.2.27.5.2xylanNtpAccessRestrictedTableXYLAN-NTP-MIB
1.3.6.1.4.1.800.2.27.5.2.1xylanNtpAccessRestrictedEntryXYLAN-NTP-MIB
1.3.6.1.4.1.800.2.27.5.2.1.3xylanNtpAccessRestrictedRestrictionsXYLAN-NTP-MIB