All MIBs › XUPS-MIB › xupsSendTrapType
xupsSendTrapType
Module: XUPS-MIB
OID (symbolic): XUPS-MIB::xupsSendTrapType
OID (numeric): 1.3.6.1.4.1.534.1.11.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of traps which will be sent to the requesting host; individual trap receivers will have individual values for this variable. The additional variables in types (3) and (4) are useful for determining which UPS is the source on multi-port network adapters, and for getting additional descriptive information. Types (1) through (4) are all SNMP version 1 trap PDUs. Values are: (1) stnd: Traps as defined in the Standard UPS MIB (RFC1628) and Generic (MIB II) traps as defined in RFC 1215. (2) xups: xupsTrapDefined Traps as defined in the PowerMIB and Generic (MIB II) traps as defined in RFC 1215. (3) stndPlus: same as stnd plus variables from the interface group and, where appropriate, xupsTrapMessage. (4) xupsPlus: xupsTrapPortN Traps (same as xups plus variables from the interface group) and, for authFail, xupsTrapMessage.
What is xupsSendTrapType?
Chooses which trap format is sent to this receiver: standard RFC1628 traps (stnd), Powerware-specific traps (xups), or 'Plus' variants that add interface-group and descriptive-message variables; useful when an NMS needs extra context such as which port on a multi-port network adapter is the source.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.1.11.2 snmpwalk -v2c -c public <target> XUPS-MIB::xupsSendTrapType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.1.11.2.1 snmpget -v2c -c public <target> XUPS-MIB::xupsSendTrapType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.534.1.11.2.1 i <value>
Start monitoring UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XUPS-MIB::xupsSendTrapType OID value, configure state conditions and alerts, and monitor any UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.1 | xupsMIB | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.1.11 | xupsTrapControl | XUPS-MIB |
| 1.3.6.1.4.1.534.1.11.2 | xupsSendTrapType | XUPS-MIB |