All MIBs › XUPS-MIB › xupsRecepAutoOffDelay
xupsRecepAutoOffDelay
Module: XUPS-MIB
OID (symbolic): XUPS-MIB::xupsRecepAutoOffDelay
OID (numeric): 1.3.6.1.4.1.534.1.12.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The delay after going On Battery until the Receptacle is automatically turned Off. A value of -1 means that this Output should never be turned Off automatically, but must be turned Off only by command. Values from 0 to 30 are valid, but probably innappropriate. The AutoOffDelay can be used to prioritize loads in the event of a prolonged power outage; less critical loads will turn off earlier to extend battery time for the more critical loads. If the utility power is restored before the AutoOff delay counts down to 0 on an outlet, that outlet will not turn Off.
What is xupsRecepAutoOffDelay?
Sets how many seconds after going On Battery this receptacle should automatically shut off; -1 means it never auto-shuts-off. Use a shorter delay on non-critical outlets to shed load first and extend runtime for critical equipment during a prolonged outage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.1.12.2.1.5 snmpwalk -v2c -c public <target> XUPS-MIB::xupsRecepAutoOffDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.1.12.2.1.5.1 snmpget -v2c -c public <target> XUPS-MIB::xupsRecepAutoOffDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.534.1.12.2.1.5.1 i <value>
Start monitoring UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XUPS-MIB::xupsRecepAutoOffDelay OID value, configure state conditions and alerts, and monitor any UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.1 | xupsMIB | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.1.12 | xupsRecep | XUPS-MIB |
| 1.3.6.1.4.1.534.1.12.2 | xupsRecepTable | XUPS-MIB |
| 1.3.6.1.4.1.534.1.12.2.1 | xupsRecepEntry | XUPS-MIB |
| 1.3.6.1.4.1.534.1.12.2.1.5 | xupsRecepAutoOffDelay | XUPS-MIB |