All MIBs › XUPS-MIB › xupsLoadShedSecsWithRestart
xupsLoadShedSecsWithRestart
Module: XUPS-MIB
OID (symbolic): XUPS-MIB::xupsLoadShedSecsWithRestart
OID (numeric): 1.3.6.1.4.1.534.1.9.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike xupsControlOutputOffDelay, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted. This is the preferred Control object to use when performing an On Battery OS Shutdown.
What is xupsLoadShedSecsWithRestart?
Schedules the UPS to shut off its output after the given number of seconds, then automatically restart once utility power returns and the UPS-defined down-time has elapsed; unlike xupsControlOutputOffDelay this command is guaranteed to run and can't be aborted once set, making it the preferred way to trigger an orderly On-Battery OS shutdown.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.1.9.6 snmpwalk -v2c -c public <target> XUPS-MIB::xupsLoadShedSecsWithRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.1.9.6.1 snmpget -v2c -c public <target> XUPS-MIB::xupsLoadShedSecsWithRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.534.1.9.6.1 i <value>
Start monitoring UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XUPS-MIB::xupsLoadShedSecsWithRestart OID value, configure state conditions and alerts, and monitor any UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.1 | xupsMIB | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.1.9 | xupsControl | XUPS-MIB |
| 1.3.6.1.4.1.534.1.9.6 | xupsLoadShedSecsWithRestart | XUPS-MIB |