All MIBs › XPRESS-MIB › rSysLongCallThreshold
rSysLongCallThreshold
Module: XPRESS-MIB
OID (symbolic): XPRESS-MIB::rSysLongCallThreshold
OID (numeric): 1.3.6.1.4.1.64.9.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enter the threshold an active call must exceed (120 - 86340 seconds) before the system generates a potential trap and event alarm. The range is from 2 mins to 23hrs 59 mins. The setting is in seconds so they are in increments of 60.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.64.9.1.30 snmpwalk -v2c -c public <target> XPRESS-MIB::rSysLongCallThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.64.9.1.30.1 snmpget -v2c -c public <target> XPRESS-MIB::rSysLongCallThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.64.9.1.30.1 i <value>
Start monitoring Gandalf/Mitel XpressWay RLAN and XpressStack Remote Access Concentrator hardware (per-card D/B-channel and WAN-link status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPRESS-MIB::rSysLongCallThreshold OID value, configure state conditions and alerts, and monitor any Gandalf/Mitel XpressWay RLAN and XpressStack Remote Access Concentrator hardware (per-card D/B-channel and WAN-link status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.64 | gandalf | XPRESS-MIB |
| 1.3.6.1.4.1.64.9 | gandalf_rlanisdn | XPRESS-MIB |
| 1.3.6.1.4.1.64.9.1 | rlanSystemGroup | XPRESS-MIB |
| 1.3.6.1.4.1.64.9.1.30 | rSysLongCallThreshold | XPRESS-MIB |