All MIBs › XPPC-MIB › upsSmartInputLineFailCause
upsSmartInputLineFailCause
Module: XPPC-MIB
OID (symbolic): XPPC-MIB::upsSmartInputLineFailCause
OID (numeric): 1.3.6.1.4.1.935.1.1.1.3.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason for the occurrence of the last transfer to UPS battery power. The variable is set to noTransfer(1) if there is no transfer yet. The variable is set to highLineVoltage(2) if the transfer to battery is caused by an over voltage greater than the high transfer voltage. The variable is set to brownout(3) if the duration of the outage is greater than five seconds and the line voltage is between 40 percent of the rated output voltage and the low transfer voltage. The variable is set to blackout(4) if the duration of the outage is greater than five seconds and the line voltage is between 40 percent of the rated output voltage and ground. The variable is set to smallMomentarySag(5) if the duration of the outage is less than five seconds and the line voltage is between 40 percent of the rated output voltage and the low transfer voltage. The variable is set to deepMomentarySag(6) if the duration of the outage is less than five seconds and the line voltage is between 40 percent of the rated output voltage and ground.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.3.2.5 snmpwalk -v2c -c public <target> XPPC-MIB::upsSmartInputLineFailCause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.3.2.5.1 snmpget -v2c -c public <target> XPPC-MIB::upsSmartInputLineFailCause.1
Start monitoring Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPPC-MIB::upsSmartInputLineFailCause OID value, configure state conditions and alerts, and monitor any Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.935 | ppc | TELECOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935.1 | products | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1 | hardware | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1 | ups | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.3 | upsInputp | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.3.2 | upsSmartInput | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.3.2.5 | upsSmartInputLineFailCause | XPPC-MIB |