All MIBs › XPPC-MIB › upsSmartControlUpsSleep
upsSmartControlUpsSleep
Module: XPPC-MIB
OID (symbolic): XPPC-MIB::upsSmartControlUpsSleep
OID (numeric): 1.3.6.1.4.1.935.1.1.1.6.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to putUpsToSleep(2) causes the UPS to go to sleep for the time specified by upsSmartConfigUpsSleepTime.
When in sleep mode, the UPS will not provide output power regardless of the input line state. Once the specified time has elapsed, output power will be restored.
Setting this value to noPutUpsToSleep(1) has no effect.
The value noPutUpsToSleep(1) will always be returned when the variable is read.
What is upsSmartControlUpsSleep?
Writing putUpsToSleep(2) puts the UPS into sleep mode for the duration set by upsSmartConfigUpsSleepTime, during which output power is withheld regardless of utility line state until the timer elapses; reading this object always returns the no-op value noPutUpsToSleep(1). It's a timed, self-recovering power-down rather than the permanent off state of upsSmartControlUpsOff.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.3 snmpwalk -v2c -c public <target> XPPC-MIB::upsSmartControlUpsSleep
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.3.1 snmpget -v2c -c public <target> XPPC-MIB::upsSmartControlUpsSleep.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.1.1.1.6.2.3.1 i <value>
Start monitoring Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPPC-MIB::upsSmartControlUpsSleep OID value, configure state conditions and alerts, and monitor any Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935.1 | products | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1 | hardware | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1 | ups | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6 | upsControlp | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6.2 | upsSmartControl | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6.2.3 | upsSmartControlUpsSleep | XPPC-MIB |