All MIBs › XPPC-MIB › upsSmartControlSimulatePowerFail
upsSmartControlSimulatePowerFail
Module: XPPC-MIB
OID (symbolic): XPPC-MIB::upsSmartControlSimulatePowerFail
OID (numeric): 1.3.6.1.4.1.935.1.1.1.6.2.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to simulatePowerFailure(2) causes the UPS switch to battery power.
Setting this value to noSimulatePowerFailure(1) has no effect.
The value noSimulatePowerFailure(1) will always be returned when the variable is read.
What is upsSmartControlSimulatePowerFail?
Writing simulatePowerFailure(2) forces the UPS to switch over to battery power even though utility power is present, letting an admin test the battery-transfer behavior on demand; reading this object always returns the no-op value noSimulatePowerFailure(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.4 snmpwalk -v2c -c public <target> XPPC-MIB::upsSmartControlSimulatePowerFail
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.4.1 snmpget -v2c -c public <target> XPPC-MIB::upsSmartControlSimulatePowerFail.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.935.1.1.1.6.2.4.1 i <value>
Start monitoring Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPPC-MIB::upsSmartControlSimulatePowerFail OID value, configure state conditions and alerts, and monitor any Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935.1 | products | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1 | hardware | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1 | ups | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6 | upsControlp | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6.2 | upsSmartControl | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.6.2.4 | upsSmartControlSimulatePowerFail | XPPC-MIB |