XPPC-MIB :: upsSmartControlRebootUps

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsXPPC-MIBupsSmartControlRebootUps

upsSmartControlRebootUps

Module: XPPC-MIB

OID (symbolic): XPPC-MIB::upsSmartControlRebootUps

OID (numeric): 1.3.6.1.4.1.935.1.1.1.6.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this variable to rebootUps(2) causes the UPS to shut off and turn back on.

Setting this value to noRebootUps(1) has no effect.

The value noRebootUps(1) will always be returned when the variable is read.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.2
snmpwalk -v2c -c public <target> XPPC-MIB::upsSmartControlRebootUps

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.6.2.2.1
snmpget -v2c -c public <target> XPPC-MIB::upsSmartControlRebootUps.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.935.1.1.1.6.2.2.1 i <value>

Start monitoring Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPPC-MIB::upsSmartControlRebootUps OID value, configure state conditions and alerts, and monitor any Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.935ppcTELECOM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.935.1productsXPPC-MIB
1.3.6.1.4.1.935.1.1hardwareXPPC-MIB
1.3.6.1.4.1.935.1.1.1upsXPPC-MIB
1.3.6.1.4.1.935.1.1.1.6upsControlpXPPC-MIB
1.3.6.1.4.1.935.1.1.1.6.2upsSmartControlXPPC-MIB
1.3.6.1.4.1.935.1.1.1.6.2.2upsSmartControlRebootUpsXPPC-MIB