All MIBs › XPPC-MIB › upsEnvWater
upsEnvWater
Module: XPPC-MIB
OID (symbolic): XPPC-MIB::upsEnvWater
OID (numeric): 1.3.6.1.4.1.935.1.1.1.9.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Water status
What is upsEnvWater?
Reports whether a water/leak sensor attached to the UPS's environmental monitoring inputs currently reads normal or abnormal (i.e., water detected). Admins treat an abnormal reading as an urgent flooding hazard near sensitive power equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.9.1.3 snmpwalk -v2c -c public <target> XPPC-MIB::upsEnvWater
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.935.1.1.1.9.1.3.1 snmpget -v2c -c public <target> XPPC-MIB::upsEnvWater.1
Start monitoring Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XPPC-MIB::upsEnvWater OID value, configure state conditions and alerts, and monitor any Vendor UPS/power-management appliance, PPC product line (trap-receiver config, UPS model/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.935 | ppc | EPPC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.935.1 | products | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1 | hardware | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1 | ups | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.9 | upsEnvironment | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.9.1 | upsEnvStatus | XPPC-MIB |
| 1.3.6.1.4.1.935.1.1.1.9.1.3 | upsEnvWater | XPPC-MIB |