All MIBs › XEROX-RESOURCES-MIB › xcmRsrcGeneralRsrcTypeAccept
xcmRsrcGeneralRsrcTypeAccept
Module: XEROX-RESOURCES-MIB
OID (symbolic): XEROX-RESOURCES-MIB::xcmRsrcGeneralRsrcTypeAccept
OID (numeric): 1.3.6.1.4.1.253.8.57.1.1.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Indicates all of the document resource types which are accepted for dynamic delivery to and use by this host system, specified in a bit-array.
Usage: This bit-array is constructed from the set of supported values from 'XcmRsrcType', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a resource type of '0' (reserved) - the low-order bit of the first octet corresponds to a resource type of '7'.
Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits.
What is xcmRsrcGeneralRsrcTypeAccept?
A bit-array (up to 32 bytes, covering up to 256 types) indicating which document resource types (per XcmRsrcType) this device will accept for dynamic delivery, e.g. fonts or forms pushed to it over the network; each bit's position corresponds to a resource-type value, big-endian, similar to SMIv2's BITS construct.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.6 snmpwalk -v2c -c public <target> XEROX-RESOURCES-MIB::xcmRsrcGeneralRsrcTypeAccept
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.57.1.1.1.6.1 snmpget -v2c -c public <target> XEROX-RESOURCES-MIB::xcmRsrcGeneralRsrcTypeAccept.1
Start monitoring Xerox Corporation XCMI-compliant printers (font/resource inventory and persistence status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEROX-RESOURCES-MIB::xcmRsrcGeneralRsrcTypeAccept OID value, configure state conditions and alerts, and monitor any Xerox Corporation XCMI-compliant printers (font/resource inventory and persistence status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57 | xcmRsrcMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1 | xcmRsrcGeneral | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1 | xcmRsrcGeneralTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.57.1.1.1 | xcmRsrcGeneralEntry | XEROX-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.253.8.57.1.1.1.6 | xcmRsrcGeneralRsrcTypeAccept | XEROX-RESOURCES-MIB |