All MIBs › XEROX-COMMON-MIB › xcmJobCurrentState
xcmJobCurrentState
Module: XEROX-COMMON-MIB
OID (symbolic): XEROX-COMMON-MIB::xcmJobCurrentState
OID (numeric): 1.3.6.1.4.1.253.8.59.6.1.1.9
Node type: OBJECT-TYPE
Type: XcmJMJobState
Access: read-only
Description: ISO DPA: Current-job-state This attribute identifies the current state of the job (pending, processing, held, etc.) Print clients and DP-Servers shall be prepared to receive all the standard job states. DP-Servers are not required to generate all job states, only those which are appropriate for the particular implementation. It is not conformant for an agent to return the unknown value if the job's state can be determined. If a server implementation or policy is to start processing documents before the last Print request (with a TRUE value for the job-submission-complete parameter) and the value of the job's job-scheduling attribute is not after-complete, the server shall change the job's current-job-state from pre- processing [building] directly to the processing state when the server begins processing any of the job's documents.
What is xcmJobCurrentState?
This object reports the current operational state of a job on a Xerox device, such as whether it is pending, processing, held, completed, or in another state. States correspond to the ISO DPA (Digital Printing Architecture) standard for job lifecycle management. An operator monitoring print job status would check this object to understand what a job is currently doing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.59.6.1.1.9 snmpwalk -v2c -c public <target> XEROX-COMMON-MIB::xcmJobCurrentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.59.6.1.1.9.1 snmpget -v2c -c public <target> XEROX-COMMON-MIB::xcmJobCurrentState.1
Start monitoring Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEROX-COMMON-MIB::xcmJobCurrentState OID value, configure state conditions and alerts, and monitor any Xerox printers and multifunction devices, XCMI foundational module (shared 64-bit counter/gauge type definitions, no device-specific data) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59 | xcmJobMonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.6 | xcmJobGenBasic | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.6.1 | xcmJobGenBasicTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.6.1.1 | xcmJobGenBasicEntry | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.6.1.1.9 | xcmJobCurrentState | XEROX-COMMON-MIB |