XEDIA-IP-MIB :: xipRouteTos

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › XEDIA-IP-MIB › xipRouteTos

xipRouteTos

Module: XEDIA-IP-MIB

OID (symbolic): XEDIA-IP-MIB::xipRouteTos

OID (numeric): 1.3.6.1.4.1.838.3.4.1.5.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The policy specifier is the IP TOS Field.  The encoding
of IP TOS is as specified  by  the  following convention.
Zero indicates the default path if no more  specific
policy applies.

+-----+-----+-----+-----+-----+-----+-----+-----+
|                 |                       |     |
|   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
|                 |                       |     |
+-----+-----+-----+-----+-----+-----+-----+-----+

         IP TOS                IP TOS
    Field     Policy      Field     Policy
    Contents    Code      Contents    Code
    0 0 0 0  ==>   0      0 0 0 1  ==>   2
    0 0 1 0  ==>   4      0 0 1 1  ==>   6
    0 1 0 0  ==>   8      0 1 0 1  ==>  10
    0 1 1 0  ==>  12      0 1 1 1  ==>  14
    1 0 0 0  ==>  16      1 0 0 1  ==>  18
    1 0 1 0  ==>  20      1 0 1 1  ==>  22
    1 1 0 0  ==>  24      1 1 0 1  ==>  26
    1 1 1 0  ==>  28      1 1 1 1  ==>  30

What is xipRouteTos?

Reports the IP Type of Service policy value associated with this route, encoded per the standard TOS-to-policy-code convention where 0 means the default path applies when no more specific policy matches.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.5.1.3
snmpwalk -v2c -c public <target> XEDIA-IP-MIB::xipRouteTos

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.5.1.3.1
snmpget -v2c -c public <target> XEDIA-IP-MIB::xipRouteTos.1

Start monitoring Xedia multiservice access router (per-interface IP address/netmask config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-IP-MIB::xipRouteTos OID value, configure state conditions and alerts, and monitor any Xedia multiservice access router (per-interface IP address/netmask config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.838xediaXEDIA-REG
1.3.6.1.4.1.838.3xediaMibsXEDIA-REG
Numeric OIDNameModule
1.3.6.1.4.1.838.3.4xediaIpMIBXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1xipObjectsXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1.5xipRouteTableXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1.5.1xipRouteEntryXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1.5.1.3xipRouteTosXEDIA-IP-MIB